| Parameter | Waarde |
|---|---|
| max. 1 per second (with inductive load) | |
| Type | block modular |
| Diepte | 54 mm |
| Breedte | 35 mm |
| Hoogte | 129.9 mm |
| Laad minimaal. | 10 kΩ |
| Uitvoernaam | Digital outputs |
| Stroomverbruik | max. 60 mA |
| Producttype | I/O component |
| Signaalvertraging | max. 100 µs (when switched on) |
| Montagetype | DIN rail mounting |
| Uitgangsspanning | 24 V DC |
| Productfamilie | Axioline F |
| Voedingsspanning | 5 V DC (via bus base module) |
| Verbindingsnaam | Axioline F connector |
| Artikelrevisie | 02 |
| Vervuilingsgraad | 2 (IEC 60664-1, EN 60664-1) |
| Beschermingsklasse | III (IEC 61140, EN 61140, VDE 0140-1) |
| Striplengte | 8 mm |
| Verbindingsmethode | Bus base module |
| Montagepositie | any (no temperature derating) |
| Aantal uitgangen | 16 |
| Omvang van de levering | including bus base module and Axioline F connectors |
| Invoeradresgebied | 0 Byte |
| Nominaal vermogen, lamp | max. 12 W (at nominal voltage) |
| Opmerking over afmetingen | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
| Beveiligingscircuit | Short-circuit protection, overload protection of the outputs; electronic |
| Transmissiesnelheid | 100 Mbps |
| Maattekening | |
| Nominale belasting, ohms | max. 12 W (48 Ω, with nominal voltage) |
| Opmerking over de aanvraag | Only for industrial use |
| Uitvoeradresgebied | 2 Byte |
| Schakelfrequentie | max. 10000 per second (with at least 50 mA load current) |
| Beschermingsgraad | IP20 |
| Aantal interfaces | 2 |
| Overspanningscategorie | II (IEC 60664-1, EN 60664-1) |
| Voedingsspanningsbereik | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Verbindingstechnologie | 2-conductor |
| Uitschakeling bij overstroom | as of 0.7 A |
| Gedrag bij overbelasting | Shutdown with automatic restart |
| Nominale uitgangsspanning | 24 V DC |
| Nominale belasting, inductief | max. 12 VA (1.2 H, 48 Ω, with nominal voltage) |
| Vereiste parametergegevens | 1 Byte |
| Luchtdruk (werking) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Geleiderdoorsnede AWG | 24 ... 16 |
| Vereiste configuratiegegevens | 6 Byte |
| Geleiderdoorsnede stijf | 0.2 mm² ... 1.5 mm² |
| Opmerking over de verbindingsmethode | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
| Dwarsdoorsnede van een geleider, stijf | 0.2 mm² ... 1.5 mm² |
| Omgevingstemperatuur (bedrijfstemperatuur) | -25 °C ... 60 °C |
| Luchtdruk (opslag/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Gedrag bij inductieve overbelasting | Output can be destroyed |
| Flexibele doorsnede van de geleider | 0.2 mm² ... 1.5 mm² |
| Uitgangsstroom wanneer uitgeschakeld | max. 300 µA |
| Uitgangsspanning wanneer uitgeschakeld | max. 1 V |
| Toegestane luchtvochtigheid (tijdens gebruik) | 5 % ... 95 % (non-condensing) |
| Doorsnede van een geleider, flexibel | 0.2 mm² ... 1.5 mm² |
| Maximale uitgangsstroom per module | 8 A (provide external protection) |
| Omgevingstemperatuur (opslag/transport) | -40 °C ... 85 °C |
| Toegestane luchtvochtigheid (opslag/transport) | 5 % ... 95 % (non-condensing) |
| Omgekeerde spanningsweerstand tegen korte pulsen | limited protection up to 0.5 A for 1 s |
| Maximaal vermogensverlies onder nominale omstandigheden | 1.6 W |
| Testspanning: 24 V voeding (I/O) / functionele massa | 500 V AC, 50 Hz, 1 min. |
| Beperking van de spanning die wordt opgewekt bij onderbreking van het circuit. | -32.8 V ... -15 V |
| Uitgangsstroom met aardverbinding onderbreekt wanneer uitgeschakeld. | < 1 mA |
| Testspanning: 5 V voeding van de lokale bus (UBus) / functionele massa | 500 V AC, 50 Hz, 1 min. |
| Testspanning: 5 V voeding van de lokale bus (UBus) / 24 V voeding (I/O's) | 500 V AC, 50 Hz, 1 min. |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding