Op voorraad Populair product
CA2T4
CA2T4 CA2-T4 PANASONIC Digital panel meter, signal input -5 to 5V, 4 digit LED, NPN
$0.00
USD
3889 op voorraad
Belangrijkste specificaties
Item:
Specifications
Weergave:
4 digit 7-segment red LED display(letter height: 8 mm0.315 in)
Product:
Ultra-compact Digital Panel Controller
Materiaal:
Enclosure: Polycarbonate
Leveranciersinformatie
PANASONIC
Producten: 4316
Wordt doorgaans binnen 2-3 werkdagen verzonden.
Kwaliteit gegarandeerd
Snelle verzending
Technische ondersteuning
Technische specificaties
| Parameter | Waarde |
|---|---|
| Item | Specifications |
| Weergave | 4 digit 7-segment red LED display(letter height: 8 mm0.315 in) |
| Product | Ultra-compact Digital Panel Controller |
| Materiaal | Enclosure: Polycarbonate |
| Functies | Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc. |
| Nettogewicht | Net weight: 55 g approx. |
| Onderdeelnummer | CA2-T4 |
| Productnaam | Ultra-compact Digital Panel Controller CA2 |
| Back-upgeheugen | Non-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less |
| Productnummer | CA2-T4 |
| Voedingsspanning | 24 V DC ± 10 % Ripple P-P 10 % or less |
| Verbindingsmethode | Terminal block connection |
| Stroomverbruik | 2.8 W or less |
| Resolutie instellen | 1 digit |
| Start-/vasthoudinput | High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold |
| Weergave: Weergavebereik | Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed) |
| Weergave: Weergavenauwkeurigheid | ±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃73.4 ± 41 ℉, 35 to 85 % RH |
| Analoge ingangen: Ingangsbereik | ±5 V |
| Indicatoren: OUT2-werking | Orange LED(Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display.Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.) |
| Analoge ingangen: Invoermethode | Single end input |
| Indicatoren: UIT 1 bewerking | Orange LED(Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display.Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.) |
| Analoge ingangen: Aantal ingangen | 1 No. |
| Analoge ingangen: bemonsteringsfrequentie | Selectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec. |
| Instelbereik drempelwaarde | -9999 to +9999 |
| Scherm: Vernieuwingsfrequentie van het scherm | Selectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec. |
| Analoge ingangen: Ingangsimpedantie | 1 MΩ |
| Indicatoren: Polariteitsindicatie | Red LED(lights up when the displayed value or the threshold value is negative) |
| Vergelijkende resultaten (OUT 1, OUT 2) | NPN open-collector transistor・ Maximum sink current: 100 mA・ Applied voltage: 35 V DC or less (between comparative output and GND)・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Analoge ingangen: A/D-conversiemethode | Successive approximation method |
| Weergave: Temperatuurkarakteristieken | ±0.5 % F.S. over 0 to +50 ℃+32 to +122 ℉ |
| Indicatoren: Automatische referentiewerking | Green LED(lights up when auto-reference function is used) |
| Omgevingsbestendigheid: Omgevingsvochtigheid | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Milieubestendigheid: Schokbestendigheid | 294 m/s2(30 G) acceleration in X, Y and Z directions three times each |
| Vergelijkende uitgangen (UITGANG 1, UITGANG 2): Hysterese | Variable from 1 to 3,999 digits |
| Omgevingsbestendigheid: Omgevingstemperatuur | 0 to +55 ℃+32 to +131 ℉(No dew condensation), Storage: -20 to +70 ℃-4 to +158 ℉ |
| Milieubestendigheid: Trillingsbestendigheid | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Milieubestendigheid: Isolatiebestendigheid | 100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Vergelijkende outputs (OUT 1, OUT 2): Reactietijd | 5 ms or less(when start / hold input is used at a sampling rate of 200 times/sec.) |
| Omgevingsbestendigheid: Spanningsbestendigheid | 1,500 V AC for one min. between all supply terminals connected together and enclosure |
| Nulpuntinvoer (0-ADJ.) / Automatische referentie-invoer (A-REF.) | Input condition: Non-voltage contact or NPN open-collector transistor inputSignal condition: Negative logic, Input time duration 10 ms or moreSignal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or openGuaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting) |
Productbeschrijving
More details
Belangrijkste kenmerken
- Industriële kwaliteit
- RoHS-conform
- CE-gecertificeerd
- 1 jaar garantie
Productdocumenten
Gegevensblad
Technische specificaties en prestatiegegevens
Gebruikershandleiding
Installatie- en bedieningshandleiding
