| Parameter | Waarde |
|---|---|
| When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules. | |
| Samensmelten | electronic |
| Opmerking | LABS release – in accordance with test specification VW PV 3.10.7:2005-0 |
| Type | Plug-in module |
| Diepte | 111.3 mm (incl. DIN rail 7.5 mm) |
| Breedte | 12.4 mm |
| Hoogte | ≤ 4000 m (amsl) |
| Materiaal | PA 6 |
| Efficiëntie | > 99 % |
| Producttype | Device circuit breakers |
| Spanningsval | 0.14 V (at 10 A) |
| Vochtigheidstest | 96 h, 95 % RH, 40 °C |
| Montagetype | pluggable onto CAPAROC CR… current rail |
| Nominale spanning | 12 V DC |
| Uitschakeltijd | 5 s (for overload 1.1…1.3 x INat IN≥ 4 A) |
| Identificatie | UL/C-UL Listed UL 508 |
| Productfamilie | CAPAROC |
| Kanaal-LED uit | off (Channel switched off) |
| Kanaal-LED rood | lit (Channel switched off, over- or undervoltage active) |
| Aantal kanalen | 2 |
| Aantal slots | 2 |
| Inschakelvertraging | 50 ms (each channel preset by default) |
| Triggermethode | E (electronic) |
| Vervuilingsgraad | 2 |
| Beschermingsklasse | III |
| Geschatte huidige IN | 10 A DC (per channel) |
| Striplengte | 10 mm |
| Kanaal-LED groen | lit (Channel switched on) |
| Verbindingsmethode | Push-in connection |
| Dwarsdoorsnede AWG | (converted acc. to IEC) |
| Fail-safe element | 15 A DC (per output channel) |
| Bedrijfsspanning | 10 V DC ... 30 V DC |
| Vermogensdissipatie | typ. 0.6 W (no load at 24 V) |
| Schok (operatie) | 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) |
| Kanaal-LED geel | lit (Channel switched on, channel load > 80% ) |
| Diëlektrische sterkte | 35 V DC (Load circuit) |
| Maattekening | |
| Terugkoppelingweerstand | max. 35 V DC |
| Aantal posities | 1 |
| Nominale overspanningsspanning | 0.5 kV |
| Beschermingsgraad | IP20 |
| Maximale capacitieve belasting | ≤ 75000 µF (Depending on the current setting and the short-circuit current available) |
| Vereiste reservezekering | Only required if Imaxof the power supply > the short-circuit switching capacity. Integrated failsafe element. |
| Temperatuurreductie | 20 A (Total current at 40°C) |
| Kanaal-LED rood-groen | flashing (Channel switched off, programming mode active, current adjustment after overload or short-circuit release) |
| Tolerantie meten I | ± 10 % (typ.) |
| Trilling (werking) | 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z) |
| Kanaal-LED rood-geel | flashing (Channel is overloaded and is switched off) |
| Overspanningsbeveiliging | ≥ 32.5 V DC (active) |
| Onderspanningsbeveiliging | ≤ 8.5 V DC (active) |
| Normen/specificaties | EN 61000-6-2 |
| Actieve stroombeperking | typ. 2.0 x INat IN≤ 3 A |
| Stroomsterkte in gesloten circuit I0 | typ. 25 mA (no load at 24 V) |
| MTBF (IEC 61709, SN 29500) | 11140621 h (at 25 °C with 21 % load) |
| Geleiderdoorsnede AWG | 24 ... 12 |
| Nominale stroomsterkte (vóór aanpassing) | 2 A |
| Geleiderdoorsnede stijf | 0.2 mm² ... 4 mm² |
| Omgevingstemperatuur (bedrijfstemperatuur) | -30 °C ... 65 °C (The temperature range of the power module must be taken into consideration) |
| Flexibele doorsnede van de geleider | 0.2 mm² ... 4 mm² |
| Kortsluitschakelcapaciteit | 300 A |
| Brandbaarheidsclassificatie volgens UL 94 | V-0 |
| Omgevingstemperatuur (opslag/transport) | -40 °C ... 70 °C |
| Geleiderdoorsnede, flexibel, met adereindhuls, met plastic huls | 0.25 mm² ... 4 mm² |
| Flexibele geleiderdoorsnede, met ferrule zonder plastic huls. | 0.25 mm² ... 4 mm² |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding