| Parameter | Waarde |
|---|---|
| for installation in electric vehicles (EV) | |
| Diepte | 117.65 mm |
| Breedte | 117.65 mm |
| Coderen | 4.7 kΩ (between PE and PP) |
| Hoogte | 4000 m (above sea level) |
| Nummer | 7 (L1, L2, L3, N, PE, DC+, DC-) |
| Algemeen | A protective cap is supplied as standard for the DC and AC contacts. |
| Kabeltype | Single wires |
| Weerstand | max. 1280 Ω ±5 K |
| Technologie | Combined Charging System |
| Sollicitatie | for charging with alternating current (AC) and with direct current (DC) |
| Sensortype | PTC chain |
| Kabellengte | 3 m |
| Producttype | Vehicle charging inlet |
| Oplaadmodus | Mode 2, 3, 4 |
| Bevestigingsschroeven | M6 |
| Montagetype | Front and rear mounting (0 to 90 degree frontal inclination possible) |
| Nominale huidige waarde | 32 A AC |
| Nominale spanning | 480 V AC |
| Laadvermogen | 26 kW |
| Productfamilie | CHARX connect universal |
| Kabelstructuur | 4 x 6 mm² |
| Kleur (Behuizing) | black (9005) |
| Inbrengkracht | < 100 N |
| Bevestigingspunt | Sensor for the AC contacts |
| Kabelweerstand | ≤ 3.2 Ω/km |
| Laadstroom | 32 A |
| Slotherkenning | available |
| Terugtrekkingsmacht | < 100 N |
| Laadstandaard | CCS type 2 |
| Dwarsdoorsnede AWG | (converted acc. to IEC) |
| Bedrijfsspanning | 24 V |
| Materiaal (Behuizing) | Plastic |
| Enkele draad, kleur | OG |
| Omgevingstemperatuur | -40 °C ... 130 °C (Operation) |
| Kleur (Paardengezicht) | black (9005) |
| Isolatieweerstand | > 200 MΩ |
| Enkele draad, materiaal | Silicone |
| Normen/voorschriften | DIN˽EN 60738-1 |
| Diameter van het montagegat | 6.70 mm (ø) |
| Temperatuurbewaking | AC contacts: PTC chain (DIN˽EN˽60738-1) |
| Buitendiameter van de kabel | 14.7 mm ±0.2 mm |
| Temperatuurmeting | DC contacts: 2x PT1000 (DIN EN 60751) |
| Noteer het aantal posities | 4-pos. |
| Soort laadstroom | AC 3-phase |
| Materiaal (contactoppervlak) | Silver |
| Meetbereik_weerstand | 790 Ω ... 1420 Ω |
| Enkele draad, dwarsdoorsnede | 70.00 mm² |
| Inbreng-/onttrekkingscycli | > 10000 |
| Aanbevolen aanpassingstijd | 600 ms |
| Type signaaloverdracht | Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 |
| Mechanische noodontgrendeling | available |
| Aanbevolen gemeten stroomsterkte | ≤ 1 mA (Umax= 16 V DC) |
| Omgekeerde stroom van de motor | max. 0.5 A |
| Opmerking over de verbindingsmethode | Crimp connection, cannot be disconnected |
| invoegcycli van de levensduur | > 10000 load cycles |
| Omgevingstemperatuur (bedrijfstemperatuur) | -30 °C ... 50 °C |
| Positie van de vergrendelingsactuator | right-side |
| Typische motorstroom voor vergrendeling | 0.05 A |
| Pauzetijd na het betreden of verlaten van het pad. | 3 s |
| Maximale verblijftijd met omgekeerde stroom | 1 s |
| Maximale spanning voor vergrendelingsdetectie | 30 V |
| Omgevingstemperatuur (opslag/transport) | -40 °C ... 85 °C |
| Mogelijk voedingsspanningsbereik bij de motor | 22 V ... 26 V |
| Schroeven zijn inbegrepen in de levering. | none |
| Beschermingsgraad (laadpoort voertuig) | IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding