Op voorraad Populair product
FM-252-4-P
FM-252-4-P PANASONIC flow sensor FM200, 500ml/minø4,PNP
$0.00
USD
4725 op voorraad
Belangrijkste specificaties
Item:
Specifications
Gewicht:
Net weight: 50 g approx., Gross weight: 115 g approx.
Details:
Resin body type
Weergave:
4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Leveranciersinformatie
PANASONIC
Producten: 4316
Wordt doorgaans binnen 2-3 werkdagen verzonden.
Kwaliteit gegarandeerd
Snelle verzending
Technische ondersteuning
Technische specificaties
| Parameter | Waarde |
|---|---|
| Item | Specifications |
| Gewicht | Net weight: 50 g approx., Gross weight: 115 g approx. |
| Details | Resin body type |
| Weergave | 4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| Product | Integrated Display Type Digital Flow Sensor |
| Materiaal | Enclosure: ABS, Body: Polyamide (Aluminum body type: Aluminum), Switch: EPDM, Display: Acrylic, Mounting screw part (Resin body type): Brass Current plate / Port filter: Stainless steel (used for the gas contact area), Sensor chip: Silicon, Gasket: Fluorine rubber |
| Lineariteit | Within ±3 % F.S. (Ambient temperature +25 ℃ +77 ℉, flow rate range 3 to 100 % F.S., atmospheric criteria on secondary side) |
| Poortgrootte | ø4 ø0.157 push-in |
| Bescherming | IP40 (IEC) |
| Accessoires | CN-F15-C1 (Connector attached cable 1 m 3.281 ft): 1 pc. |
| Onderdeelnummer | FM-252-4-P |
| Kabellengte | Total length up to 10 m 32.808 ft is possible with 0.3 mm2, or more, cable. |
| Productnaam | Integrated Display Type Digital Flow Sensor FM-200 |
| Herhaalbaarheid | Within ±1 % F.S. |
| Externe invoer | ON voltage: +5 V to +VOFF voltage: 0 to +0.6 V, or openInput time: 80 ms or more |
| Productnummer | FM-252-4-P |
| Voedingsspanning | 12 to 24 V DC ± 10 % Ripple P-P10 % or less |
| Omgevingsvochtigheid | 35 to 90 % RH, Storage: 35 to 90 % RH |
| Toepasselijke vloeistof | Clean air, compressed air, nitrogen gas(Note):The clean air complies with JIS B 8392-1.1.1 to 5.6.2, and the compressed air complies with JIS B 8392-1.1.1 to 1.6.2. |
| Schokbestendigheid | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Verbindingsmethode | Connector |
| Vergelijkende output | PNP open-collector transistor・Maximum source current: 50 m A or less・Applied voltage: 26.4 V DC or less(between comparative output and +V)・Residual voltage: 2.4 V or less (at 50 mA source current) |
| Aarding van de behuizing | Floating(Note):As a varistor (clamping voltage: approx. 40 V) is connected to the aluminum body type, do not apply voltage higher than the rated voltage of the sensor. |
| Omgevingstemperatuur | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -10 to +60 ℃ +14 to +140 ℉ |
| Huidig verbruik | Normal mode: 60 mA or less, ECO mode: 40 mA or less |
| Volledige debiet | 500 mℓ/min.(Note):Converted to volumetric flow at +20 ℃ +68 ℉ and 1 atmospheric pressure (101 kPa). |
| Nominaal drukbereik | -0.09 to +0.7 MPa |
| Trillingsbestendigheid | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or 49 m/s2max. acceleration, in X, Y and Z directions for two hours each |
| Analoge spanningsuitgang | Output voltage: 1 to 5 V, Output impedance: 1 kΩ approx.[Refer to "Analog voltage output" for more details.] |
| Isolatieweerstand | 10 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| Nauwkeurigheidsgarantiebereik | Bi-direction : -100 to -3 % F.S., +3 to +100 % F.S.One-side direction : +3 to +100 % F.S.(Note):Take care that if fluid flows in the vicinity of zero-point which is out of the accuracy assurance range, the instant flow rate value may forcibly display "zero", or the integrated flow display value may not be counted up, or the integrated pulse output may not be outputted. |
| Drukkarakteristieken | Within ±5 % F.S. (-0.09 to +0.7 MPa, +25 ℃ +77 ℉, atmospheric criteria on secondary side) |
| Spanningsbestendigheid | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| drukbestendigheid | 1 MPa |
| Gespecificeerde geïntegreerde waarde | 5 mℓ |
| Temperatuurkarakteristieken | Within ±0.2 % F.S./℃ (+25 ℃ +77 ℉ criteria, +15 to +35 ℃ +59 to +95 ℉ ambient temperature range) |
| Vergelijkende output: Hysterese | Window comparator mode: 1 to 8 % F.S. approx. (variable) (Factory settings: approx. 1 % F.S.), Hysteresis mode: Variable (minimum 1 digit) |
| CE-markeringsrichtlijn | EMC Directive, RoHS Directive |
| Vergelijkende uitvoer: Uitvoermodi | Output OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode |
| Directe doorstroomsnelheid: Weergavebereik | -550 to +550 mℓ/min.(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| Vergelijkende output: reactietijd | 50 ms, 80 ms, 120 ms, 200 ms, 400 ms, 800 ms, 1,500 ms, selectable by key operation |
| Geïntegreerde debiet: Weergavebereik | ±9999999 mℓ(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| Vergelijkende output: Kortsluitbeveiliging | Incorporated |
| Directe doorstroomsnelheid: Instelling en weergaveresolutie | 1 mℓ/min. |
| Geïntegreerde doorstroomsnelheid: instelling en weergaveresolutie | 1 mℓ |
Productbeschrijving
More details
Belangrijkste kenmerken
- Industriële kwaliteit
- RoHS-conform
- CE-gecertificeerd
- 1 jaar garantie
Productdocumenten
Gegevensblad
Technische specificaties en prestatiegegevens
Gebruikershandleiding
Installatie- en bedieningshandleiding
