| Parameter | Waarde |
|---|---|
| Type | modular |
| Diepte | 71.5 mm |
| Breedte | 48.8 mm |
| Hoogte | 119.8 mm |
| CCCex-nota | Use in potentially explosive areas is not permitted in China. |
| Uitvoernaam | Digital outputs |
| Stroomverbruik | max. 60 mA |
| Producttype | I/O component |
| ID-code (hex) | BD |
| Montagetype | DIN rail mounting |
| ID-code (dec.) | 189 |
| Bedrijfsmodus | Process data mode with one byte |
| Uitgangsspanning | 24 V (US- 1 V) |
| Productfamilie | Inline |
| Voedingsspanning | 7.5 V DC (via voltage jumper) |
| Verbindingsnaam | Inline connector |
| Aantal kanalen | 8 |
| Registerlengte | 8 bit |
| Artikelrevisie | 13 |
| Vervuilingsgraad | 2 (IEC 60664-1, EN 60664-1) |
| Beschermingsklasse | III (IEC 61140, EN 61140, VDE 0140-1) |
| Striplengte | 8 mm |
| Verbindingsmethode | Inline data jumper |
| Lengtecode (decimaal) | 129 |
| Lengtecode (hex) | 81 |
| Aantal uitgangen | 8 |
| Omvang van de levering | including Inline connectors and marking fields |
| Invoeradresgebied | 0 Byte |
| Nominaal vermogen, lamp | 12 W |
| Opmerking over afmetingen | Housing dimensions |
| Beveiligingscircuit | Overload protection, short-circuit protection of outputs |
| Transmissiesnelheid | 500 kbps |
| Maattekening | |
| Nominale belasting, ohms | 12 VA |
| Opmerking over de aanvraag | Only for industrial use |
| Uitvoeradresgebied | 1 Byte |
| Beschermingsgraad | IP20 |
| Diagnostische berichten | Short-circuit or overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module |
| Aantal interfaces | 2 |
| Overspanningscategorie | II (IEC 60664-1, EN 60664-1) |
| Verwerk datakanaal | 8 bit |
| Voedingsspanningsbereik | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Verbindingstechnologie | 4-conductor |
| Gedrag bij overbelasting | Auto restart |
| Nominale uitgangsspanning | 24 V DC (voltage difference at Inom≤ 1 V) |
| Nominale belasting, inductief | 12 W |
| Vereiste parametergegevens | 3 Byte |
| Luchtdruk (werking) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Geleiderdoorsnede AWG | 28 ... 16 |
| Vereiste configuratiegegevens | 4 Byte |
| Geleiderdoorsnede stijf | 0.08 mm² ... 1.5 mm² |
| Gedrag bij het uitschakelen van de spanning | The output follows the power supply without delay |
| Dwarsdoorsnede van een geleider, stijf | 0.08 mm² ... 1.5 mm² |
| Omgevingstemperatuur (bedrijfstemperatuur) | -25 °C ... 55 °C |
| Luchtdruk (opslag/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Gedrag bij inductieve overbelasting | Output can be destroyed |
| Flexibele doorsnede van de geleider | 0.08 mm² ... 1.5 mm² |
| Toegestane luchtvochtigheid (tijdens gebruik) | 10 % ... 95 % (according to DIN EN 61131-2) |
| Doorsnede van een geleider, flexibel | 0.08 mm² ... 1.5 mm² |
| Maximale uitgangsstroom per module | 4 A |
| Maximale uitgangsstroom per kanaal | 500 mA |
| Omgevingstemperatuur (opslag/transport) | -25 °C ... 85 °C |
| Toegestane luchtvochtigheid (opslag/transport) | 10 % ... 95 % (according to DIN EN 61131-2) |
| Maximaal vermogensverlies onder nominale omstandigheden | 1.8 W |
| Testspanning: 24 V voeding (I/O) / functionele massa | 500 V AC, 50 Hz, 1 min. |
| Testspanning: 7,5 V voeding (buslogica)/24 V voeding (I/O) | 500 V AC, 50 Hz, 1 min. |
| Testspanning: 5 V voeding, inkomende externe bus/7,5 V voeding (buslogica) | 500 V AC, 50 Hz, 1 min. |
| Testspanning: 5 V voeding, uitgaande remote bus/7,5 V voeding (buslogica) | 500 V AC, 50 Hz, 1 min. |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding