| Parameter | Waarde |
|---|---|
| Type | modular |
| Diepte | 71.5 mm |
| Breedte | 12.2 mm |
| Hoogte | 119.8 mm |
| CCCex-nota | Use in potentially explosive areas is not permitted in China. |
| Uitvoernaam | Digital outputs |
| Stroomverbruik | max. 30 mA |
| Producttype | I/O component |
| ID-code (hex) | BD |
| Montagetype | DIN rail mounting |
| ID-code (dec.) | 189 |
| Bedrijfsmodus | Process data mode with one byte |
| Uitgangsspanning | 24 V (US- 1 V) |
| Productfamilie | Inline |
| Voedingsspanning | 7.5 V DC (via voltage jumper) |
| Verbindingsnaam | Inline connector |
| Aantal kanalen | 8 |
| Registerlengte | 8 bit |
| Artikelrevisie | 09 |
| Vervuilingsgraad | 2 (IEC 60664-1, EN 60664-1) |
| Beschermingsklasse | III (IEC 61140, EN 61140, VDE 0140-1) |
| Striplengte | 8 mm |
| Verbindingsmethode | Inline data jumper |
| Lengtecode (decimaal) | 129 |
| Lengtecode (hex) | 81 |
| Aantal uitgangen | 8 |
| Omvang van de levering | including Inline connector and labeling field |
| Invoeradresgebied | 0 Byte |
| Nominaal vermogen, lamp | 12 W |
| Opmerking over afmetingen | Housing dimensions |
| Beveiligingscircuit | Overload protection, short-circuit protection of outputs; electronic |
| Transmissiesnelheid | 500 kbps |
| Maattekening | |
| Nominale belasting, ohms | 12 W (48 Ω) |
| Opmerking over de aanvraag | Only for industrial use |
| Uitvoeradresgebied | 1 Byte |
| Beschermingsgraad | IP20 |
| Diagnostische berichten | Short-circuit or overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module |
| Aantal interfaces | 2 |
| Overspanningscategorie | II (IEC 60664-1, EN 60664-1) |
| Verwerk datakanaal | 8 bit |
| Voedingsspanningsbereik | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Verbindingstechnologie | 1-conductor |
| Uitschakeling bij overstroom | min. 0.7 A |
| Gedrag bij overbelasting | Auto restart |
| Nominale uitgangsspanning | 24 V DC |
| Nominale belasting, inductief | 12 VA (1.2 H, 48 Ω) |
| Vereiste parametergegevens | 3 Byte |
| Luchtdruk (werking) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Geleiderdoorsnede AWG | 28 ... 16 |
| Vereiste configuratiegegevens | 4 Byte |
| Geleiderdoorsnede stijf | 0.08 mm² ... 1.5 mm² |
| Gedrag bij het uitschakelen van de spanning | The output follows the power supply without delay |
| Dwarsdoorsnede van een geleider, stijf | 0.08 mm² ... 1.5 mm² |
| Omgevingstemperatuur (bedrijfstemperatuur) | -25 °C ... 55 °C |
| Luchtdruk (opslag/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Gedrag bij inductieve overbelasting | Output can be destroyed |
| Flexibele doorsnede van de geleider | 0.08 mm² ... 1.5 mm² |
| Uitgangsstroom wanneer uitgeschakeld | max. 300 µA |
| Uitgangsspanning wanneer uitgeschakeld | max. 1 V |
| Toegestane luchtvochtigheid (tijdens gebruik) | 10 % ... 95 % (non-condensing) |
| Doorsnede van een geleider, flexibel | 0.08 mm² ... 1.5 mm² |
| Maximale uitgangsstroom per module | 4 A |
| Maximale uitgangsstroom per kanaal | 500 mA |
| Omgevingstemperatuur (opslag/transport) | -25 °C ... 85 °C |
| Toegestane luchtvochtigheid (opslag/transport) | 10 % ... 95 % (non-condensing) |
| Omgekeerde spanningsweerstand tegen korte pulsen | Reverse voltage proof |
| Maximaal vermogensverlies onder nominale omstandigheden | 0.85 W |
| Maximale werkfrequentie bij ohmse nominale belasting | max. 300 Hz (this switching frequency is limited by the data rate selected, the number of bus devices, the structure of the bus, the software used and the control or computer system used) |
| Testspanning: 24 V voeding (I/O) / functionele massa | 500 V AC, 50 Hz, 1 min. |
| Beperking van de spanning die wordt opgewekt bij onderbreking van het circuit. | -45.8 V ... -15 V |
| Testspanning: 7,5 V voeding (buslogica)/24 V voeding (I/O) | 500 V AC, 50 Hz, 1 min. |
| Testspanning: 7,5 V voeding (buslogica)/functionele massa | 500 V AC, 50 Hz, 1 min. |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding