| Parameter | Waarde |
|---|---|
| Protection against polarity reversal (segment supply/main supply); Parallel diodes for protection against polarity reversal; in the event of an error the high current flowing through the diodes causes the fuse connected upstream to blow. | |
| Type | modular |
| Diepte | 71.5 mm |
| Breedte | 48.8 mm |
| Hoogte | 135 mm |
| Stroomverbruik | max. 1.25 A (at nominal voltage; consisting of: 0.75 A DC for the communications power and 0.5 A DC for the analog voltage supply) |
| Producttype | I/O component |
| ID-code (hex) | none |
| Montagetype | DIN rail mounting |
| Productfamilie | Inline |
| Voedingsspanning | 24 V DC (via Inline connector) |
| Verbindingsnaam | Inline connector |
| Registerlengte | 0 bit |
| Artikelrevisie | 06 |
| Beschermingsklasse | III (IEC 61140, EN 61140, VDE 0140-1) |
| Striplengte | 8 mm |
| Verbindingsmethode | Inline shield connector |
| Omvang van de levering | including Inline connectors and marking fields |
| Invoeradresgebied | 0 Byte |
| Beveiligingscircuit | Surge protection (segment supply, main supply, 24 V supply); Input protective diodes (can be destroyed by permanent overload)Pulse loads up to 1500 W are short circuited by the input protective diode. |
| Bijzondere eigenschappen | for extending the Inline local bus |
| Transmissiesnelheid | 500 kbps / 2 Mbps (Can be used in Inline stations with these transmission speeds) |
| Maattekening | |
| Opmerking over de aanvraag | Only for industrial use |
| Uitvoeradresgebied | 0 Byte |
| Beschermingsgraad | IP20 |
| Aantal interfaces | 1 (incoming local bus) |
| Voedingsspanningsbereik | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Transmissiefysica | Copper |
| Vereiste parametergegevens | 0 Byte |
| Luchtdruk (werking) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Geleiderdoorsnede AWG | 28 ... 16 |
| Vereiste configuratiegegevens | 0 Byte |
| Geleiderdoorsnede stijf | 0.08 mm² ... 1.5 mm² |
| Opmerking over de verbindingsmethode | Standard INTERBUS cable |
| Dwarsdoorsnede van een geleider, stijf | 0.08 mm² ... 1.5 mm² |
| Omgevingstemperatuur (bedrijfstemperatuur) | -25 °C ... 55 °C |
| Luchtdruk (opslag/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Flexibele doorsnede van de geleider | 0.08 mm² ... 1.5 mm² |
| Toegestane luchtvochtigheid (tijdens gebruik) | 10 % ... 95 % (non-condensing) |
| Doorsnede van een geleider, flexibel | 0.08 mm² ... 1.5 mm² |
| Omgevingstemperatuur (opslag/transport) | -25 °C ... 85 °C |
| Aantal apparaten met parameterkanaal | 63 |
| Toegestane luchtvochtigheid (opslag/transport) | 10 % ... 95 % (non-condensing) |
| Maximaal vermogensverlies onder nominale omstandigheden | 1.45 W |
| Aantal lokale busapparaten dat kan worden aangesloten | max. 63 (without additional power terminal block, observe allowable total current consumption) |
| Testspanning: 5 V voeding via lokale bus / 24 V netvoeding, 24 V segmentvoeding | 500 V AC, 50 Hz, 1 min. |
| Testspanning: 24 V netvoeding, 24 V segmentvoeding, 24 V voeding voor het genereren van spanningen U en UANA / functionele aarde | 500 V AC, 50 Hz, 1 min. |
| Testspanning: 7,5 V communicatievoeding, 24 V analoge voeding, 24 V voeding voor het genereren van spanningen UL en UANA/functionele massa | 500 V AC, 50 Hz, 1 min. |
| Testspanning: 5 V voeding via lokale bus / 7,5 V communicatievoeding, 24 V analoge voeding, 24 V voeding voor het genereren van spanningen ULand UANA | 500 V AC, 50 Hz, 1 min. |
| Testspanning: 7,5 V communicatievoeding, 24 V analoge voeding, 24 V voeding voor het genereren van spanningen U en UANA / 24 V hoofdvoeding, 24 V segmentvoeding | 500 V AC, 50 Hz, 1 min. |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding