| Parameter | Waarde |
|---|---|
| Transient protection; Suppressor diode | |
| Type | modular |
| Diepte | 71.5 mm |
| Breedte | 12.2 mm |
| Hoogte | 119.8 mm |
| Uitvoernaam | Analog outputs |
| Stroomverbruik | max. 65 mA |
| Gegevensformaten | IB IL, S7-compatible |
| Producttype | I/O component |
| ID-code (hex) | 5B |
| Montagetype | DIN rail mounting |
| ID-code (dec.) | 91 |
| Productfamilie | Inline |
| Voedingsspanning | 7.5 V DC (via voltage jumper) |
| Verbindingsnaam | Inline connector |
| Registerlengte | 64 bit |
| Artikelrevisie | 03 |
| Vervuilingsgraad | 2 (IEC 60664-1, EN 60664-1) |
| Beschermingsklasse | III (IEC 61140, EN 61140, VDE 0140-1) |
| Striplengte | 8 mm |
| Verbindingsmethode | Inline data jumper |
| Lengtecode (decimaal) | 04 |
| Lengtecode (hex) | 04 |
| Aantal uitgangen | 2 |
| Omvang van de levering | including Inline connector and labeling field |
| Invoeradresgebied | 8 Byte |
| Opmerking over afmetingen | Housing dimensions |
| Beveiligingscircuit | Short-circuit and overload protection; Electronic |
| Bijzondere eigenschappen | Extreme conditions version |
| Transmissiesnelheid | 500 kbps |
| D/A-conversietijd | typ. 10 µs |
| Maattekening | |
| Opmerking over de aanvraag | Only for industrial use |
| Uitvoeradresgebied | 8 Byte |
| Gegevens bijwerken verwerken | bus-synchronous |
| Beschermingsgraad | IP20 |
| Diagnostische berichten | Failure of the internal I/O supply I/O error message sent to the bus coupler |
| Aantal interfaces | 2 |
| Overspanningscategorie | II (IEC 60664-1, EN 60664-1) |
| Verwerk datakanaal | 64 bit |
| Voedingsspanningsbereik | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Transmissiefysica | Copper |
| Verbindingstechnologie | 2-conductor |
| Huidig uitgangssignaal | 0 mA ... 20 mA |
| Spanningsuitgangssignaal | 0 V ... 10 V |
| Vereiste parametergegevens | 10 Byte |
| Luchtdruk (werking) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| D/A-omzetter resolutie | 12 bit |
| Toegestane kabellengte | max. 250 m (The specifications refer to nominal operation after complying with installation instructions. The specifications refer to the following reference cable type: Shielded power station cable: LiYCY; 2 x 2 x 0,5 mm²; VDE0812) |
| Geleiderdoorsnede AWG | 28 ... 16 |
| Vereiste configuratiegegevens | 5 Byte |
| Geleiderdoorsnede stijf | 0.08 mm² ... 1.5 mm² |
| Dwarsdoorsnede van een geleider, stijf | 0.08 mm² ... 1.5 mm² |
| Omgevingstemperatuur (bedrijfstemperatuur) | -25 °C ... 55 °C (Standard) |
| Belasting/uitgang belastingsstroom uitgang | ≤ 450 Ω |
| Belasting/uitgang belastingsspanning uitgang | > 1 kΩ |
| Weergave van uitvoerwaarden | 12 bits (11 bits + sign bit) |
| Luchtdruk (opslag/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Flexibele doorsnede van de geleider | 0.08 mm² ... 1.5 mm² |
| Toegestane luchtvochtigheid (tijdens gebruik) | 10 % ... 95 % (non-condensing) |
| Doorsnede van een geleider, flexibel | 0.08 mm² ... 1.5 mm² |
| Omgevingstemperatuur (opslag/transport) | -40 °C ... 85 °C |
| Opmerking betreffende de verbindingstechnologie | shielded |
| Toegestane luchtvochtigheid (opslag/transport) | 10 % ... 95 % (non-condensing) |
| Testspanning: 7,5 V voeding (buslogica)/functionele massa | 500 V AC, 50 Hz, 1 min. |
| Testspanning: 24 V analoge voeding (analoge I/O)/functionele massa | 500 V AC, 50 Hz, 1 min. |
| Testspanning: 7,5 V voeding (buslogica) / 24 V analoge voeding (analoge I/O) | 500 V AC, 50 Hz, 1 min. |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding