| Parameter | Waarde |
|---|---|
| Light grid | |
| Opmerking | G3 |
| Diepte | 113.6 mm |
| Schok | 10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction) |
| Breedte | 45.2 mm |
| Hoogte | 107.74 mm |
| Spanning | 24 V DC (via A1) |
| insteekbaar | yes |
| Interfaces | DIN rail TBUS for connection to the master module, not supplied as standard |
| Ohmse belasting | min. 50 Ω (Observe limiting continuous current) |
| Sollicitatie | Emergency stop |
| Aanduiding | A1/A2 |
| Filtertijd | typ. 5 ms (at A1 in the event of voltage dips at Us) |
| Testpulsen | < 120 µs (Test pulse width of low test pulses) |
| Kabellengte | max. 100 m (per input) |
| Producttype | Safety device |
| Herstarttijd | min. 5 s (Boot time) |
| Montagetype | DIN rail mounting |
| Reactietijd | see user manual |
| Stop categorie | 0 |
| Identificatie | CE-compliant |
| Inschakelstroom | < 14.4 A (Δt = 0.5 ms at Us) |
| Statusweergave | 1 x LED (green), 1 x LED (orange), 1 x LED (blue) |
| Lekstroom | max. 500 µA |
| Foutindicatie | 2 x LED (red) |
| Bouwmateriaal | Polyamide PA non-reinforced |
| Maximale hoogte | ≤ 2000 m (Above sea level) |
| Aantal ingangen | 8 |
| Beschermingsklasse | III |
| Striplengte | 10 mm |
| Verbindingsmethode | Push-in connection |
| Montagepositie | vertical or horizontal |
| Aantal uitgangen | 4 |
| Uitvoerbeschrijving | Safety-related digital outputs |
| Beveiligingscircuit | Serial protection against polarity reversal |
| Transmissiesnelheid | 100 Mbps (Full duplex) |
| Huidig verbruik | typ. 3.7 mA (typically with US) |
| Ontladingscircuit | Yes, internal |
| Maximale inductieve belasting | max. 2.4 mH |
| Schakelfrequentie | max. 1/4 x tCycle[Hz] |
| Beschermingsgraad | IP20 |
| Maximale capacitieve belasting | max. 820 nF |
| Montage-instructies | Observe derating |
| Aantal verbindingen | 2 |
| Trilling (werking) | 10 Hz ... 150 Hz, 2g |
| Communicatieprotocol | PROFINET |
| Maximale inschakelstroom | 1.1 A (Δt = 3 s at Us) |
| Nominale bedrijfsmodus | 100% operating factor |
| Nominale uitgangsspanning | 24 V DC (Supply via A1) |
| Prestatieniveau (PL) | e (2-channel wiring) |
| Energieverbruik in de VS | typ. 2.88 W (Outputs inactive) |
| Beschrijving van de invoer | Safety-related digital inputs |
| Nominale isolatiespanning | 250 V AC |
| Kortsluitbeveiliging | no |
| Weergave van de bedrijfsspanning | 1 x green LED |
| Geleiderdoorsnede AWG | 24 ... 16 |
| Beperking van de continue stroom | 400 mA (per channel) |
| Nominaal uitgangsspanningsbereik | 18.5 V DC ... 28.1 V DC (US- 0,7 V) |
| Veiligheidsintegriteitsniveau (SIL) | 3 |
| Geleiderdoorsnede stijf | 0.2 mm² ... 2.5 mm² |
| Ingangsstroombereik "0" signaal | < 0.2 mA |
| Ingangsspanningsbereik "0"-signaal | 0 V DC ... 5 V DC |
| Ingangsspanningsbereik "1" signaal | 11 V DC ... 28.8 V DC |
| Nominale overspanningsspanning/isolatie | Basic insulation 4 kV between all current paths and housing |
| Omgevingstemperatuur (bedrijfstemperatuur) | -10 °C ... 70 °C (observe derating) |
| Nominale stuurstroom IS | 120 mA (RMS typ. inactive for all outputs) |
| Flexibele doorsnede van de geleider | 0.2 mm² ... 2.5 mm² |
| Uitgangsspanning wanneer uitgeschakeld | < 0.3 V |
| Omgevingstemperatuur (opslag/transport) | -20 °C ... 85 °C |
| Nominale voedingsspanning van het stuurcircuit (VS) | 19.2 V DC ... 28.8 V DC |
| Minimale mate van bescherming van de locatie van het instrument | IP54 |
| Maximale toegestane luchtvochtigheid (opslag/transport) | 95 % (non-condensing) |
| Maximale toelaatbare totale geleiderweerstand | max. 1.2 kΩ (Input and reset circuit at US) |
| Maximale toelaatbare relatieve luchtvochtigheid (tijdens gebruik) | 95 % (non-condensing) |
| Maximaal vermogensverlies onder nominale omstandigheden | 9.85 W (with max. permissible load) |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding