| Parameter | Waarde |
|---|---|
| High demand | |
| Diepte | 114.5 mm |
| Schok | 15g |
| Breedte | 12.5 mm |
| Hoogte | 112.2 mm |
| Huidig | max. 100 mA |
| Spanning | approx. 22 V DC (UD- 2 V) |
| insteekbaar | yes |
| CCCex-nota | Use in potentially explosive areas is not permitted in China. |
| Relais type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Sollicitatie | Safe switch off |
| Certificaat | UL 22 ATEX 2912X |
| Aanduiding | A1/A2 |
| Filtertijd | max. 2 ms (at A1-A2; test pulse width) |
| Uitgangszekering | 6 A gL/gG (N/O contact 13/14) |
| Producttype | Coupling relay |
| Schroefdraad | M3 |
| Montage-instructies | See derating curve |
| Montagetype | DIN rail mounting |
| Hersteltijd | 500 ms |
| Stop categorie | 0 |
| Identificatie | II 3G Ex ec nC IIC T4 Gc |
| Inschakelstroom | typ. 400 mA (Δt s) |
| Productfamilie | PSRmini |
| Statusweergave | 1 x LED (green) |
| Kleur (Behuizing) | yellow (RAL 1018) |
| Artikelrevisie | 07 |
| Contactmateriaal | AgSnO2 |
| Foutindicatie | 1 x LED (red) |
| Bouwmateriaal | Polyamide |
| Maximale hoogte | ≤ 2000 m (Above sea level) |
| Striplengte | 7 mm |
| Verbindingsmethode | Screw connection |
| Montagepositie | vertical, horizontal, with front of module upward |
| Aantal uitgangen | 1 (safety-related N/O contacts: 13/14 (13F/14)) |
| Oppervlakte Totaal huidige | 36 A2(13/14, see to derating) |
| Schakelspanning | min. 12 V AC/DC |
| Aanhaalmoment | 0.5 Nm ... 0.6 Nm |
| Uitvoerbeschrijving | 2 N/O contacts in series, without delay, floating |
| Beveiligingscircuit | Serial protection against polarity reversal; Suppressor diode 33 V |
| Schakelcapaciteit | min. 60 mW |
| Ingangsstroom bij UD | 6 mA (at 31-A2 for UD; depending on load + 100 mA at M1 and 32) |
| Opmerking over de aanvraag | Only for industrial use |
| Schakelfrequentie | max. 0.5 Hz |
| Beschermingsgraad | IP20 |
| Inschakelstroom bij UD | typ. 2.5 A (Δt D) |
| Gebruikelijke releasetijd | < 35 ms (when controlled via A1) |
| Normen/voorschriften | EN 60664-1, EN 60079-7, EN 60079-15 |
| Trilling (werking) | 10 Hz ... 150 Hz, 2g |
| Contactschakeltype | 1 enabling current path |
| Maximale inschakelstroom | 500 mA (Δt = 1 ms at Us) |
| Nominale bedrijfsmodus | 100% operating factor |
| Mechanische levensduur | 10x 106cycles |
| Energieverbruik in de VS | typ. 1.2 W |
| Nominale isolatiespanning | 250 V AC |
| Kortsluitbeveiliging | no |
| Weergave van de bedrijfsspanning | 1 x yellow LED |
| Typische starttijd bij ons | < 100 ms (with Uswhen controlled via A1) |
| Geleiderdoorsnede AWG | 24 ... 12 |
| Beperking van de continue stroom | 6 A (13/14 for high-demand) |
| Diagnostische voedingsspanning UD | 24 V DC -15 % / +10 % |
| Veiligheidsintegriteitsniveau (SIL) | 3 |
| Geleiderdoorsnede stijf | 0.2 mm² ... 2.5 mm² |
| Nominale overspanningsspanning/isolatie | Safe isolation, 6 kV reinforced insulation from control circuit, start circuit, confirmation current path, signal output to the enabling current path; 4 kV/basic insulation between all current paths and housing |
| Omgevingstemperatuur (bedrijfstemperatuur) | -40 °C ... 70 °C (observe derating) |
| Nominale stuurstroom IS | typ. 50 mA |
| Flexibele doorsnede van de geleider | 0.2 mm² ... 2.5 mm² |
| Omgevingstemperatuur (opslag/transport) | -40 °C ... 85 °C |
| Nominale voedingsspanning van het stuurcircuit (VS) | 20.4 V DC ... 26.4 V DC |
| Minimale mate van bescherming van de locatie van het instrument | IP54 |
| Maximale toegestane luchtvochtigheid (opslag/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximale toelaatbare relatieve luchtvochtigheid (tijdens gebruik) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximaal vermogensverlies onder nominale omstandigheden | 3.43 W (IL² = 36 A²) |
| Schakelcapaciteit conform IEC 60947-5-1 | 4 A (24 V (DC13); N/O contact 13/14) |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding