| Parameter | Waarde |
|---|---|
| Safe isolation, reinforced insulation 6 kV between 250 V load current paths and 24 V logic paths | |
| Diepte | 104 mm |
| Schok | 10g for Δt = 11 ms (continuous shock: 5g for Δt = 16 ms) |
| Breedte | 14 mm |
| Hoogte | 80 mm |
| Categorie | 1 |
| Relais type | Electromechanical relay in accordance with IEC/EN 61810 |
| Sollicitatie | Forcibly guided contacts |
| Aanduiding | A1/A2 |
| Filtertijd | 1 ms (Test pulse width, high test pulse and low test pulse) |
| Uitgangszekering | 6 A gL/gG |
| Producttype | Coupling relay |
| Schroefdraad | M3 |
| Montagetype | DIN rail mounting |
| Hersteltijd | 500 ms (following demand of the safety function) |
| Identificatie | CE-compliant |
| Inschakelstroom | typ. 100 mA (Δt = 10 ms at Us) |
| Productfamilie | PLC-INTERFACE |
| Statusweergave | 1 x green LED (PWR) |
| Contactmateriaal | AgNi |
| Bouwmateriaal | Polyamide |
| Maximale hoogte | ≤ 2000 m (Above sea level) |
| Vervuilingsgraad | 2 |
| Striplengte | 8 mm |
| Verbindingsmethode | Screw connection |
| Montagepositie | vertical or horizontal |
| Aantal uitgangen | 2 |
| Oppervlakte Totaal huidige | 37 A2(N/O contact, high-demand, observe derating) |
| Aanhaalmoment | 0.5 Nm |
| Uitvoerbeschrijving | safety-related |
| Beveiligingscircuit | Serial protection against polarity reversal; Suppressor diode, 38.6 V/600 W |
| Schakelcapaciteit | min. 150 mW (N/O contact / N/C contact) |
| Schakelfrequentie | max. 1 Hz |
| Beschermingsgraad | IP20 |
| Overspanningscategorie | III |
| Gebruikelijke releasetijd | < 50 ms (on demand via A1) |
| Montage-instructies | See derating curve |
| Normen/voorschriften | IEC 60947-1 |
| Trilling (werking) | 10 Hz ... 150 Hz, amplitude 0.75 mm, 1g |
| Contactschakeltype | 2 changeover contacts |
| Nominale bedrijfsmodus | 100% operating factor |
| Prestatieniveau (PL) | c |
| Mechanische levensduur | approx. 107cycles |
| Energieverbruik bij UD | 650 mW (to US) |
| Nominale isolatiespanning | 250 V AC |
| Weergave van de bedrijfsspanning | 1 x green LED (PWR) |
| Typische starttijd bij ons | < 70 ms (when controlled via A1) |
| Geleiderdoorsnede AWG | 26 ... 14 |
| Beperking van de continue stroom | 6 A (N/O contact, high demand) |
| Veiligheidsintegriteitsniveau (SIL) | 2 |
| Geleiderdoorsnede stijf | 0.14 mm² ... 2.5 mm² |
| Nominale overspanningsspanning/isolatie | Basic insulation 4 kV between all current paths and housing |
| Omgevingstemperatuur (bedrijfstemperatuur) | -20 °C ... 60 °C (observe derating) |
| Nominale stuurstroom IS | 30 mA |
| Flexibele doorsnede van de geleider | 0.14 mm² ... 2.5 mm² |
| Omgevingstemperatuur (opslag/transport) | -20 °C ... 85 °C |
| Nominale voedingsspanning van het stuurcircuit (VS) | 21.6 V DC ... 28.8 V DC |
| Minimale mate van bescherming van de locatie van het instrument | IP54 |
| Maximale toegestane luchtvochtigheid (opslag/transport) | 75 % (on average; 95% occasionally, non-condensing) |
| Maximale toelaatbare relatieve luchtvochtigheid (tijdens gebruik) | 75 % (on average; 95% occasionally, non-condensing) |
| Maximaal vermogensverlies onder nominale omstandigheden | 4.825 W (UB= 30 V, US= 24 V, IS= 30 mA, IL² = 37 A, Rcontact= 0.1 Ω) |
| Schakelcapaciteit conform IEC 60947-5-1 | 6 A (AC1, 230 V) |
| Flexibele geleiderdoorsnede, met ferrule zonder plastic huls. | 0.2 mm² ... 2.5 mm² |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding