| Parameter | Waarde |
|---|---|
| Safety door | |
| Diepte | 114.5 mm |
| Schok | 15g |
| Breedte | 22.5 mm |
| Hoogte | 99 mm |
| Categorie | 4 |
| insteekbaar | yes |
| Relais type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Sollicitatie | Emergency stop |
| Overeenkomst | ∞ |
| Filtertijd | 5 ms (at A1 in the event of voltage dips at Us) |
| Uitgangszekering | 10 A gL/gG (Enabling current paths) |
| Producttype | Safety relays |
| Schroefdraad | M3 |
| Montage-instructies | See derating curve |
| Montagetype | DIN rail mounting |
| Hersteltijd | 1 s (following demand of the safety function) |
| Stop categorie | 0 |
| Identificatie | CE-compliant |
| Inschakelstroom | < 3.5 A (Δt = 3 ms at Us) |
| Productfamilie | PSRclassic |
| Statusweergave | LED (green) |
| Kleur (Behuizing) | yellow (RAL 1018) |
| Artikelrevisie | 06 |
| Contactmateriaal | AgSnO2, + 0.2 µm Au |
| Bouwmateriaal | Polyamide |
| Maximale hoogte | ≤ 2000 m (Above sea level) |
| Striplengte | 7 mm |
| Verbindingsmethode | Screw connection |
| Montagepositie | vertical or horizontal |
| Oppervlakte Totaal huidige | 72 A2(Enabling current paths) |
| Beveiligingscircuit | Surge protection; Suppressor diode |
| Huidig verbruik | typ. 38 mA (S12) |
| Opmerking over de aanvraag | Only for industrial use |
| Beschermingsgraad | IP20 |
| Gebruikelijke releasetijd | 20 ms (on demand via the sensor circuit) |
| Normen/voorschriften | DIN EN 60947-1 |
| Typische reactietijd | 100 ms (Monitored/manual start) |
| Trilling (werking) | 10 Hz ... 150 Hz, 2g |
| Contactschakeltype | 3 enabling current paths |
| Maximale inschakelstroom | 6 A |
| Nominale bedrijfsmodus | 100% operating factor |
| Prestatieniveau (PL) | e (5 A DC13; 5 A AC15; 8760 switching cycles/year) |
| Inschakelstroom, minimum | 10 mA |
| Mechanische levensduur | approx. 107cycles |
| Energieverbruik in de VS | typ. 1.68 W (DC) |
| Minimale schakelcapaciteit. | 100 mW |
| Nominale isolatiespanning | 250 V |
| Maximale schakelspanning | 250 V AC/DC |
| Minimale schakelspanning | 10 V AC/DC |
| Weergave van de bedrijfsspanning | Green LED |
| Typische starttijd bij ons | 250 ms (when controlled via A1) |
| Geleiderdoorsnede AWG | 24 ... 12 |
| Beperking van de continue stroom | 6 A (Observe derating and load limit curve) |
| Typische ingangsstroom bij UN | 70 mA DC (at Us) |
| Veiligheidsintegriteitsniveau (SIL) | 3 |
| Geleiderdoorsnede stijf | 0.2 mm² ... 2.5 mm² |
| Nominale overspanningsspanning/isolatie | See section “Insulation coordination” |
| Omgevingstemperatuur (bedrijfstemperatuur) | -20 °C ... 55 °C (observe derating) |
| Nominale stuurstroom IS | typ. 70 mA |
| Flexibele doorsnede van de geleider | 0.2 mm² ... 2.5 mm² |
| Uitschakelvermogen (ohmse belasting) max. | see load limit curve |
| Ingangsspanningsbereik ten opzichte van de VN-norm. | 0.85 ... 1.1 |
| Omgevingstemperatuur (opslag/transport) | -40 °C ... 70 °C |
| Nominale voedingsspanning van het stuurcircuit (VS) | 24 V DC -15 % / +10 % |
| Minimale mate van bescherming van de locatie van het instrument | IP54 |
| Spanning bij ingang/start en terugkoppelingscircuit | approx. 24 V DC |
| Maximale toegestane luchtvochtigheid (opslag/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximale toelaatbare totale geleiderweerstand | approx. 50 Ω (Input and start circuits at US) |
| Maximale toelaatbare relatieve luchtvochtigheid (tijdens gebruik) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximaal vermogensverlies onder nominale omstandigheden | 16.44 W (US= 26.4 V, IL² = 72 A², PTotal max= 2.04 W + 14.4 W) |
| Schakelcapaciteit conform IEC 60947-5-1 | 6 A (DC13, enabling current paths) |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding