| Parameter | Waarde |
|---|---|
| No brightness test pulses / high test pulses permitted. | |
| Diepte | 114.5 mm |
| Schok | 15g |
| Breedte | 22.5 mm |
| Hoogte | 117.5 mm |
| Categorie | 4 |
| insteekbaar | yes |
| Relais type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Sollicitatie | Extension module |
| Overeenkomst | ∞ |
| Filtertijd | max. 2 ms (Test pulse width low test pulses, at 100 ms test pulse rate) |
| Uitgangszekering | 10 A gL/gG |
| Producttype | Safety relays |
| Montagetype | DIN rail mounting |
| Hersteltijd | 1 s (following demand of the safety function) |
| Stop categorie | 0 |
| Identificatie | CE-compliant |
| Inschakelstroom | max. 110 mA (typically with US, Δt = 3 ms) |
| Productfamilie | PSRclassic |
| Statusweergave | 2 x LED (green) |
| Kleur (Behuizing) | yellow (RAL 1018) |
| Artikelrevisie | 06 |
| Contactmateriaal | AgSnO2 |
| Bouwmateriaal | Polyamide |
| Maximale hoogte | ≤ 2000 m (Above sea level) |
| Aantal ingangen | 2 |
| Striplengte | 8 mm |
| Verbindingsmethode | Push-in connection |
| Montagepositie | vertical or horizontal |
| Aantal uitgangen | 3 |
| Oppervlakte Totaal huidige | 72 A2(observe derating) |
| Schakelspanning | min. 10 V |
| Uitvoerbeschrijving | 2 N/O contacts each in series, safety-related, floating |
| Beveiligingscircuit | Suppressor diode |
| Schakelcapaciteit | min. 100 mW |
| Huidig verbruik | 38 mA (typical, at 24 V) |
| Opmerking over de aanvraag | Only for industrial use |
| Schakelfrequentie | max. 0.5 Hz |
| Beschermingsgraad | IP20 |
| Gebruikelijke releasetijd | 10 ms (on demand via the sensor circuit) |
| Normen/voorschriften | DIN EN 60947-1 |
| Typische reactietijd | 125 ms (For Usautostart) |
| Trilling (werking) | 10 Hz ... 150 Hz, amplitude 0.15 mm, 2g |
| Contactschakeltype | 3 enabling current paths |
| Nominale bedrijfsmodus | 100% operating factor |
| Prestatieniveau (PL) | e (5 A DC13; 5 A AC15; 8760 switching cycles/year) |
| Mechanische levensduur | approx. 107cycles |
| Beschrijving van de invoer | safety-related |
| Nominale isolatiespanning | 250 V |
| Geleiderdoorsnede AWG | 24 ... 16 |
| Beperking van de continue stroom | 6 A (Observe derating and load limit curve) |
| Veiligheidsintegriteitsniveau (SIL) | 3 |
| Geleiderdoorsnede stijf | 0.2 mm² ... 1.5 mm² |
| Ingangsstroombereik "0" signaal | 0 mA ... 2 mA |
| Ingangsspanningsbereik "0"-signaal | 0 V DC ... 5 V DC |
| Ingangsspanningsbereik "1" signaal | 20.4 V ... 26.4 V |
| Nominale overspanningsspanning/isolatie | 4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.) |
| Omgevingstemperatuur (bedrijfstemperatuur) | -20 °C ... 55 °C |
| Flexibele doorsnede van de geleider | 0.2 mm² ... 1.5 mm² |
| Omgevingstemperatuur (opslag/transport) | -40 °C ... 70 °C |
| Minimale mate van bescherming van de locatie van het instrument | IP54 |
| Maximale toegestane luchtvochtigheid (opslag/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximale toelaatbare totale geleiderweerstand | 50 Ω |
| Maximale toelaatbare relatieve luchtvochtigheid (tijdens gebruik) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximaal vermogensverlies onder nominale omstandigheden | 16.44 W (US= 26.4 V, IL² = 72 A², PTotal max= 2.04 W + 14.4 W) |
| Schakelcapaciteit conform IEC 60947-5-1 | 5 A (AC15) |
| Geleiderdoorsnede, flexibel, met adereindhuls, met plastic huls | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Flexibele geleiderdoorsnede, met ferrule zonder plastic huls. | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding