| Parameter | Waarde |
|---|---|
| 10.3 mA (No load, mains operation) | |
| Tijd | 316800 h |
| Kleur | red |
| Diepte | 125 mm |
| I/O/S | asymmetrical |
| Invoer | 2 kV (Test Level 3 - asymmetrical) |
| Schok | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
| Breedte | 35 mm |
| Hoogte | 130 mm |
| Uitvoer | 2 kV (Test Level 3 - asymmetrical) |
| Signaal | 2 kV (Test Level 4 - asymmetrical) |
| Spanning | 10 V (Test Level 3) |
| Opmerkingen | Criterion A |
| Waardevermindering | 60 °C ... 70 °C (2.5 %/K) |
| Duur | 12 ms (SFB technology) |
| Interface | IFS (Interface system data port) |
| Efficiëntie | > 98 % (Mains operation, with charged energy storage) |
| Criterium A | Normal operating behavior within the specified limits. |
| Criterium B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Motorkapversie | Galvanized sheet steel, free from chrome (VI) |
| Uitgangsvermogen | 120 W |
| Producttype | DC UPS |
| Schroefdraad | M4 |
| UL-goedkeuringen | UL Listed UL 508 |
| Montage-instructies | alignable: horizontal 5 mm, vertical 50 mm |
| Overbruggingstijd | 28800 s |
| Bufferperiode | 2 h (With battery module 12 AH) |
| IQ-technologie | Yes |
| Ingangsspanning | 24 V DC |
| Montagetype | DIN rail mounting |
| Klimaatklasse | 3K3 (in acc. with EN 60721) |
| Uitgangsspanning | 24 V |
| Productfamilie | QUINT USV |
| Statusweergave | LED |
| Frequentiebereik | 80 MHz ... 1 GHz |
| Soort woning | Aluminum (AlMg3) |
| Artikelrevisie | 12 |
| Laadstroom | 0.2 A ... 1.36 A |
| Ontlading in de lucht | 15 kV (Test Level 4) |
| Bouwmateriaal | Metal |
| Beschermingsklasse | III |
| Striplengte | 7 mm |
| Verbindingsmethode | Pluggable screw connection |
| Contactontlading | 8 kV (Test Level 4) |
| Montagepositie | horizontal DIN rail NS 35, EN 60715 |
| Vermogensdissipatie | 2.5 W (Mains operation) |
| Spoorwegtoepassingen | EN 50121-4 |
| Netwerkbeheer | Yes |
| Nominale spanning UN | 24 V DC |
| Uitvoerbeschrijving | Relay (floating) |
| Soorten signalering | LED |
| Huidig verbruik | 9.4 A (maximum, mains operation) |
| Ingangsspanningsbereik | 18 V DC ... 30 V DC |
| Test veldsterkte | 20 V/m |
| Verbinding in serie | no |
| Beschermingsgraad | IP20 |
| Uitgangsstroomlimiet | In mains mode according to connected upstream current limiting device |
| Uitgangsspanningsbereik | 18 V DC ... 30 V DC |
| POWER BOOST (IBoost) | 7.5 A (-25 °C ... 40 °C) |
| Eindlaadspanning | 24 V DC ... 29 V DC (temperature compensated) |
| Laagspanningsrichtlijn | Conformance with Low Voltage Directive 2014/35/EC |
| Normen/voorschriften | EN 61000-4-2 |
| Maximaal aanhaalmoment | 0.6 Nm |
| Trilling (werking) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
| Parallelle verbinding | yes, up to 2 modules with redundancy module |
| Vaste back-updrempel | ≤ 22 V DC |
| Ingangsspanningsbereik DC | 18 V DC ... 30 V DC |
| Nominaal capaciteitsbereik | 0.8 Ah ... 140 Ah |
| Nominale uitgangsspanning | 24 V DC |
| Opmerking over de statusweergave | static on |
| Aanhaalmoment, min. | 0.5 Nm |
| Continue belastingsstroom | ≤ 100 mA |
| Temperatuurcompensatie | 42 mV/K (preset) |
| Maximale schakelspanning | ≤ 30 V AC/DC |
| Signaalaanduiding | Power In OK |
| MTBF (IEC 61709, SN 29500) | > 500000 h (25 °C) |
| Variabele verbindingsdrempel | 1 V/0.1 s |
| Nominaal ingangsspanningsbereik | 24 V DC |
| Nominale uitgangsstroom (IN) | 5 A (-25 °C ... 50 °C) |
| Standaard - Elektrische veiligheid | EN 60950-1/VDE 0805 (SELV) |
| Elektromagnetische compatibiliteit | Conformance with EMC Directive 2014/30/EU |
| Selectieve zekeringonderbreking (ISFB) | 30 A (-25 °C ... 60 °C) |
| Spanningstype van de voedingsspanning | DC |
| Omgevingstemperatuur (bedrijfstemperatuur) | -25 °C ... 70 °C |
| Controle op aanwezigheid van de batterij (cyclisch) | 60 s |
| Isolatiespanning ingang/uitgang | 500 V DC |
| Maximale AWG-doorsnede van de geleider. | 12 |
| Geleiderdoorsnede min. AWG. | 20 |
| Installatieafstand rechts/links | 5 mm / 5 mm |
| Installatieafstand boven/onder | 50 mm / 50 mm |
| Temperatuurcompensatie (vooraf ingesteld) | 42 mV/K |
| Dwarsdoorsnede van de geleider, maximale stijfheid. | 2.5 mm² |
| Dwarsdoorsnede van de geleider, stijf min. | 0.2 mm² |
| EMC-vereisten voor geluidsemissie | EN 61000-6-3 |
| EMC-vereisten voor ruisimmuniteit | EN 61000-6-1 |
| Controle op aanwezigheid van de batterij/tijdsinterval | 1 min. |
| Flexibele maximale doorsnede van de geleider. | 2.5 mm² |
| Flexibele doorsnede van de geleider, minimaal. | 0.2 mm² |
| Omgevingstemperatuur (opslag/transport) | -40 °C ... 85 °C |
| Isolatiespanning ingang, uitgang / behuizing | 750 V DC |
| Maximale toelaatbare relatieve luchtvochtigheid (tijdens gebruik) | ≤ 95 % (25 °C, non-condensing) |
| Uitgestraalde radiostoring conform EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| Radiostoringsspanning conform EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| Standaard – Elektronische apparatuur voor gebruik in elektrische installaties en de integratie daarvan in elektrische installaties. | EN 50178/VDE 0160 (PELV) |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding