| Parameter | Waarde |
|---|---|
| > 30 V DC | |
| Diepte | 125 mm |
| Schok | 30g, 18 ms per spatial direction (in accordance with IEC 60068-2-27) |
| Breedte | 244 mm |
| onbuigzaam | 0.2 mm² ... 6 mm² |
| Hoogte | 130 mm |
| Chipset | Silicon Labs CP2104-F03-GM |
| Vergrendelen | Screw |
| Capaciteit | 16 kJ |
| Positie | 1.x |
| Topologie | Point-to-point |
| flexibele | 0.2 mm² ... 4 mm² |
| Interface | USB (Modbus/RTU) |
| Efficiëntie | > 98 % (with charged energy storage device) |
| Toegangstijd | ≤ 2 s |
| Buffertijd | 4 min. (2.5 A) |
| stijf (AWG) | 24 ... 10 |
| Stationair draaien-bestendig | yes |
| Producttype | DC UPS with integrated capacitor |
| Oplaadtijd | approx. 5.4 min. (2.5 A) |
| Ingangsspanning | 24 V DC (SELV) |
| Montagetype | DIN rail mounting |
| Klimaatklasse | 3K3 (in acc. with EN 60721) |
| Inschakelstroom | ≤ 7 A (≤ 4 ms) |
| Uitgangsspanning | 24 V DC |
| Productfamilie | QUINT capacity module |
| Inschakeltijd | 1 ms (buffer mode) |
| Bouwmateriaal | Metal |
| Maximale hoogte | ≤ 4000 m |
| Beschermingsklasse | III (Special application (SELV)) |
| Striplengte | 8 mm |
| Verbindingsmethode | Screw connection |
| Montagepositie | horizontal DIN rail NS 35, EN 60715 |
| Uitgangsstroom IN | 20 A |
| Aanhaalmoment | 0.5 Nm ... 0.6 Nm |
| Aansluitingsmarkering | 5.1 |
| Transmissiesnelheid | 9600 baud ... 115200 baud (Default: 115200 baud) |
| Mate van vervuiling | 2 |
| Diëlektrische sterkte | max. 35 V DC (Reverse polarity protection) |
| Ingangsspanningsbereik | 22.5 V DC ... 30 V DC |
| Interne ingangszekering | no |
| Kortsluitingsbestendig | yes (with input fuse) |
| Transmissielengte | max. 5 m |
| Verbinding in serie | No |
| Beschermingsgraad | IP20 |
| Elektrische isolatie | Yes, UL approved |
| Aantal interfaces | 1 |
| Overspanningscategorie | II |
| Standaardaanduiding | Protective extra-low voltage |
| Transmissiefysica | USB 2.0 |
| Montage-instructies | alignable: horizontally 0 mm, vertically 50 mm |
| Aandrijfvorm schroefkop | Slotted L |
| Trilling (werking) | 0,7g |
| Parallelle verbinding | yes |
| Vaste back-updrempel | < 22 V DC |
| Normen/specificaties | IEC 61010-1 (SELV) |
| MTBF (IEC 61709, SN 29500) | 1839057 h (25 °C) |
| Statische boost (IStat.Boost) | 25 A |
| Spanningsval, ingang/uitgang | 0.5 V DC |
| Omgevingstemperatuur (bedrijfstemperatuur) | -25 °C ... 60 °C (> 40 °C Derating: 1 %/K) |
| Uitgangsvermogen POUT(UN, IOUT= IN) | 480 W |
| Omgevingstemperatuur (opslag/transport) | -40 °C ... 60 °C |
| Uitgangsvermogen POUT(UN, IOUT= Istat.Boost) | 600 W |
| Flexibel met huls en plastic hoes. | 0.25 mm² ... 4 mm² |
| Omgevingstemperatuur (getest opstarttype) | -40 °C |
| Isolatiespanning ingang, uitgang / behuizing | 500 V |
| Flexibel met huls, zonder plastic huls. | 0.25 mm² ... 4 mm² |
| Maximale toelaatbare relatieve luchtvochtigheid (tijdens gebruik) | ≤ 95 % |
| Stroomverbruik PN(UN, IOUT= IN, Icharge= 0) | 488 W |
| Flexibel met dubbele huls en plastic huls. | 0.5 mm² ... 2.5 mm² |
| Huidig verbruik IN(UN, IOUT= IN, Icharge= 0) | 20 A |
| Stroomverbruik zonder belasting (UN, IOut= 0, ICharge= 0) | 3 W |
| Stroomverbruik Pcharge(UN, IOUT= 0, Icharge= max) | 244 W |
| Huidig verbruik INo-Load(UN, IOUT= 0, Icharge= 0) | 0.1 A (No-load) |
| Huidig verbruik Icharge(UN, IOUT= 0, Icharge= max) | 10 A (charging process) |
| Vermogensdissipatie Nominale belasting (UN, IOut= IN, ICharge= 0) | 10 W |
| Stroomverbruik Pmax(UN, IOUT= IStat.Boost, Icharge= max) | 599 W |
| Huidig verbruik Imax(UN, IOUT= IStat.Boost, Icharge = max) | 30 A |
| Brandbaarheidsclassificatie volgens UL 94 (behuizing / aansluitblokken) | V0 |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding