| Parameter | Waarde |
|---|---|
| Naam | RSD-200B-12 |
| Staat | Recommended Model |
| Voorraad | Yes |
| Formaat | Box |
| Serie | RSD-200 |
| Goedkeuringen | EC |
| Vermogen (W) | 200,40 |
| Subformato | IP20 |
| Breedte (mm) | 86.00 |
| Hoogte (mm) | 40.00 |
| Invoerbereik | 2:1 |
| Toepassingen | Railway, Industrial, Telecommunications |
| DC-ingang Max. | 31,20 |
| DC-ingang Min | 16,80 |
| Fabrikant | MEAN WELL |
| Producttype | Dc/DC converters |
| Isolatie (V) | 4.000,00 |
| Uitgangsspanning | 12,00 |
| Maximaal vermogen (W) | 200.4 |
| Bereik DC-ingang | 16,8, 18, 19, 20,4, 21, 21,6, 22,5, 24, 25,2, 26,4, 28, 28,8, 30, 31,2 |
| Ingangsconnector | Screw-Type |
| Lang/Achtergrond | 191.00 |
| Uitgebreide beschrijving | Dc/DC converter rail is a regulated isolated output.Converter for railway applications, industrial or telecommunications.Input range16,8-31,2 Vdc(14,4-33,6 Vdc for 1 second). Range rail to 24V input.Output voltage12vdc.Output intensityTo 16.7 A.Power:200,4 W.Isolation input-output 4000Vcc.Efficiency of the89%.Operating temperature from-40up+70 ° C(see the curve derived in the technical data sheet). 85 ° c for 10 minutes with ventilation by conduction.Dimensions (Length x Width x Height):191 x 86 x 40mm.3 years of warranty.Manufacturer: MEAN WELL.It is a converter designed for railway applications, industrial or telecommunications.Is certified with the regulations for railway EN50155 and EN45545-2 in front of the fire.Can operate up to 55C at full load and 70 ° C at 60% load or 70 ° C ambient temperature with ventilation by driving without losses. Also supports a temperature range of more demanding level rail Tx to 85ºC ambient temperature for 10 minutes with ventilation by driving on a metal surface.This converter semi-encapsulation has been designed for the most demanding applications at the level of vibration, temperature, and humidity. Has a low profile of only 40mm and uses only components prepared for high temperatures as for example capacitors of 105ºC.It has a low noise and ripple, and high efficiency and is protected against reverse polarity at the input. The inrush current is limited by a resistor in series with a MOSFET to reduce the peak starting current to reliably regardless of the ambient temperature.Its output is protected against short-circuits and overloads by limiting output current, this allows you to start loads with a high inrush. |
| Uitgangsconnector | Screw-Type |
| Garantie (jaren) | 3,00 |
| Land van herkomst | Taiwan |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding