| Parameter | Waarde |
|---|---|
| Status display I/O Yellow LED | |
| LED | yes |
| Breedte | 58 mm |
| Coderen | A |
| Hoogte | 26 mm |
| Lengte | 117 mm |
| Afgeschermd | no |
| Kabeltype | PUR/PVC black [PUR] |
| Sollicitatie | Standard |
| Kabellengte | 5 m |
| Kabelgewicht | 77.9 kg/km |
| Producttype | Distributor box |
| Testspanning | 2000 V |
| UL AWM-stijl | 20549 |
| Montage-instructies | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Algehele wending | Wires twisted in layers |
| AWG-signaallijn | 22 |
| Aantal slots | 4 |
| Contactmateriaal | Cu alloy |
| Vlamvertragendheid | DIN EN 50265 |
| Materiaalbehuizing | PBT |
| Andere vormen van verzet | Highly resistant to acids, alkaline solutions and solvents |
| Lokale diagnostiek | Supply voltage Green LED |
| Weerstand tegen olie | according to VDE 0472 Part 803 |
| Geleidermateriaal | Bare Cu litz wires |
| Bewaakte functie | Supply voltage |
| Nominale spanning UN | 24 V DC |
| Enkele draad, kleur | brown, blue, green/yellow, white, green, yellow, gray |
| Bijzondere eigenschappen | Silicone-free |
| Maattekening | |
| Opmerking over de aanvraag | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| Aantal posities | 4 |
| Beschermingsgraad | IP65 |
| Nominale stroom, totaal | 12 A |
| Afdichtingsmateriaal: O-ring | NBR |
| Standaardaanduiding | M12 connector |
| Buitenmantel, kleur | black RAL 9005 |
| Dikte van de binnenmantel | ≥ 0.15 mm |
| Nominale spanning, kabel | 300 V |
| Optische weergave | Green LED |
| Buitenmantel, materiaal | PUR |
| Statusweergave aanwezig | Yes |
| Dwarsdoorsnede van een geleider | 4x 0.34 mm² (Signal line) |
| Buitendiameter van de kabel | 6.90 mm ±0.2 mm |
| Dikte, buitenmantel | ≥ 0.38 mm |
| Contactmateriaal van de drager | PA |
| Contactoppervlakmateriaal | gold-plated |
| Materiaal: Schroefhuls | Die-cast zinc |
| Materiaal draadisolatie | PVC |
| Normen/specificaties | IEC 61076-2-101 |
| Materiaal: Vormmassa | PUR |
| Maximale bedrijfsspanning Umax | 30 V DC |
| Draaddiameter inclusief isolatie | 1.3 mm ±0.1 mm (Signal line) |
| Omgevingstemperatuur (bedrijfstemperatuur) | -40 °C ... 90 °C (cable, fixed installation) |
| Geleiderstructuur signaallijn | 19x 0.15 mm |
| Dynamisch draagvermogen (buiging) | Max. bending cycles: 1500000, Bending radius: 69 mm, Traversing path: 2 m, Traversing rate: 2 m/s |
| Sensor/actuator aansluitsysteem | M12-SPEEDCON-socket |
| Stroomvoerende capaciteit per sleuf | 4 A |
| Brandbaarheidsclassificatie volgens UL 94 | V0 |
| Maximale stroomvoerende capaciteit per circuit | 2 A |
| Sleuf/positie = Draadkleur of aansluiting | 1 / 4 (A) = WH |
| Minimale buigradius, vaste installatie | 7.5 x D |
| Kleinste buigradius, vaste installatie | 52 mm |
| Kabel van de koppelsensor/actuator in de aanhaalmomentsleuf | 0.4 Nm |
| Minimale buigradius, flexibele installatie | 10 x D |
| Kleinste buigradius, verplaatsbare installatie | 69 mm |
| Aanhaalmoment van de montageschroef voor het bevestigen van de behuizing | 0.5 Nm |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding