| Parameter | Waarde |
|---|---|
| Status display I/O Yellow LED | |
| LED | yes |
| Breedte | 30 mm |
| Coderen | A |
| Hoogte | 27 mm |
| Lengte | 134.4 mm |
| Sollicitatie | Standard |
| Producttype | Distributor box |
| Montage-instructies | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Aantal slots | 8 |
| Artikelrevisie | 02 |
| Contactmateriaal | CuZn |
| Materiaalbehuizing | PBT |
| Verbindingsmethode | M16 plug connection |
| Lokale diagnostiek | Supply voltage per module Green LED |
| Bewaakte functie | Supply voltage per module |
| Nominale spanning UN | 24 V DC |
| Maattekening | |
| Opmerking over de aanvraag | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| Aantal posities | 3 |
| Beschermingsgraad | IP67 |
| Nominale stroom, totaal | 6 A |
| Afdichtingsmateriaal: O-ring | FKM |
| Standaardaanduiding | M8 connector |
| Optische weergave | Green LED |
| Statusweergave aanwezig | Yes |
| Contactmateriaal van de drager | PBT |
| Contactoppervlakmateriaal | Ni/Au |
| Materiaal: Schroefhuls | Cu alloy |
| Normen/specificaties | IEC 61076-2-104 |
| Materiaal: Vormmassa | PUR |
| Maximale bedrijfsspanning Umax | 30 V DC |
| Omgevingstemperatuur (bedrijfstemperatuur) | -20 °C ... 80 °C |
| Sensor/actuator aansluitsysteem | M8 socket |
| Stroomvoerende capaciteit per sleuf | 2 A |
| Contactmateriaal, zijde van de hoofdkabel | CU alloy |
| Maximale stroomvoerende capaciteit per circuit | 2 A |
| Sleuf/positie = Draadkleur of aansluiting | 1 / 4 (A) = P |
| Kabel van de koppelsensor/actuator in de aanhaalmomentsleuf | 0.2 Nm |
| Aanhaalmoment - hoofdkabel - stekkerverbinding | 1.5 Nm |
| Aanhaalmoment van de montageschroef voor het bevestigen van de behuizing | 0.8 Nm |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding