| Parameter | Waarde |
|---|---|
| 120 V DC | |
| LED | no |
| Breedte | 58 mm |
| Hoogte | 21 mm |
| Lengte | 34 mm |
| Afgeschermd | no |
| Kabeltype | PUR/PVC black [PUR] |
| Sollicitatie | Sensor/actuator box |
| Kabellengte | 5 m |
| Kabelgewicht | 107.4 kg/km |
| Producttype | Connector hood |
| UL AWM-stijl | 20549 (80°C/300 V) |
| Montage-instructies | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Algehele wending | Wires twisted in layers |
| AWG-signaallijn | 22 |
| Aantal slots | 8 |
| Vlamvertragendheid | DIN EN 50265 |
| Materiaalbehuizing | PBT |
| Andere vormen van verzet | Highly resistant to acids, alkaline solutions and solvents |
| Verbindingsmethode | Pluggable screw connection |
| Weerstand tegen olie | according to VDE 0472 Part 803 |
| Geleidermateriaal | Bare Cu litz wires |
| Nominale spanning UN | 120 V AC |
| Enkele draad, kleur | brown, blue, green/yellow, white, green, yellow, gray, pink, red, black, violet |
| Bijzondere eigenschappen | Silicone-free |
| Maattekening | |
| Aantal posities | 11 |
| Beschermingsgraad | IP65 |
| Nominale stroom, totaal | 10 A |
| Isolatieweerstand | ≥ 5 MΩ*km |
| Buitenmantel, kleur | black RAL 9005 |
| Dikte van de binnenmantel | ≥ 0.15 mm |
| Nominale spanning, kabel | 300 V AC |
| Buitenmantel, materiaal | PUR |
| Statusweergave aanwezig | No |
| Testspanning Kern/Kern | 2000 V (50 Hz, 5 min.) |
| Dwarsdoorsnede van een geleider | 8x 0.34 mm² (Signal line) |
| Buitendiameter van de kabel | 8.50 mm ±0.2 mm |
| Dikte, buitenmantel | ≥ 0.38 mm |
| Materiaal draadisolatie | PVC |
| Maximale geleiderweerstand | ≤ 53 Ω/km (Signal line) |
| Aanhaalmoment, afdekschroef | 0.35 Nm |
| Draaddiameter inclusief isolatie | 1.3 mm ±0.1 mm (Signal line) |
| Omgevingstemperatuur (bedrijfstemperatuur) | -40 °C ... 90 °C (cable, fixed installation) |
| Geleiderstructuur signaallijn | 19x 0.15 mm |
| Dynamisch draagvermogen (buiging) | Max. bending cycles: 1500000, Bending radius: 10 x D, Traversing path: 2 m, Traversing rate: 2 m/s |
| Sensor/actuator aansluitsysteem | M12-SPEEDCON-socket |
| Stroomvoerende capaciteit per sleuf | 4 A |
| Contactmateriaal, zijde van de hoofdkabel | CU alloy |
| Maximale stroomvoerende capaciteit per circuit | 2 A |
| Sleuf/positie = Draadkleur of aansluiting | 1 / 4 (A) = WH |
| Minimale buigradius, vaste installatie | 7.5 x D |
| Kleinste buigradius, vaste installatie | 64 mm |
| Minimale buigradius, flexibele installatie | 10 x D |
| Kleinste buigradius, verplaatsbare installatie | 85 mm |
| Materiaal van het contactoppervlak, zijde van de hoofdkabel | gold-plated |
| Materiaal van de contactdrager aan de zijde van de hoofdkabel | PA |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding