| Parameter | Waarde |
|---|---|
| 0.8 Nm (Connector with coupling sleeve) | |
| Breedte | 19 mm |
| Coderen | D |
| Hoogte | 19 mm |
| Lengte | 61 mm |
| Algemeen | This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling) |
| Afgeschermd | yes |
| Sollicitatie | Data |
| Hoofdontwerp | Plug |
| Sensortype | PROFINET |
| Kabelaansluiting | straight |
| Producttype | Circular connector (cable-side) |
| Montage-instructies | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Afdichtingsmateriaal | Neoprene |
| Contactmateriaal | CuSn |
| Diameter behuizing | 19 mm |
| Kopdraadtype | M12 |
| Buitendiameter | 4 mm ... 8 mm |
| Verbindingsmethode | Insulation displacement connection |
| Hoofdkabeluitgang | straight |
| Aanhaalmoment | 0.4 Nm (M12 knurl) |
| Contactweerstand | ≤ 5 mΩ |
| Nominale stroom IN | 1.75 A |
| Nominale spanning UN | 48 V AC |
| Mate van vervuiling | 3 |
| Maattekening | |
| Aantal posities | 4 |
| Beschermingsgraad | IP67 |
| Aantal kabelaansluitingen | 1 |
| Overspanningscategorie | II |
| Signaaltype/categorie | PROFINET CAT5 (based on IEC 11801), 100 Mbps |
| Standaardaanduiding | M12 connector |
| Isolatieweerstand | ≥ 100 MΩ |
| Materiaal van de handgreep | Zinc die-cast, nickel-plated |
| Contactmateriaal van de drager | PA 6 |
| Contactoppervlakmateriaal | Ni/Au |
| Normen/specificaties | according to IEC 61076-2-101 |
| Inbreng-/onttrekkingscycli | ≥ 100 |
| Aansluitdoorsnede AWG | 23 ... 22 |
| Materiaal voor schroefverbinding | Brass, nickel-plated |
| Omgevingstemperatuur (bedrijfstemperatuur) | -40 °C ... 85 °C |
| Brandbaarheidsclassificatie volgens UL 94 | V0 |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding