| Parameter | Waarde |
|---|---|
| 30 V DC | |
| Opmerking | In line with |
| Coderen | A |
| Lengte | 44 mm |
| Algemeen | NOTE:Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| Afgeschermd | yes |
| Hoofdontwerp | Plug |
| Sensortype | Universal |
| Kabelaansluiting | straight |
| Producttype | Circular connector (cable-side) |
| Afdichtingsmateriaal | NBR |
| Diameter behuizing | 22 mm |
| Kopdraadtype | M12 |
| Buitendiameter | 4.5 mm ... 7.5 mm |
| Verbindingsmethode | Crimp connection |
| Hoofdkabeluitgang | straight |
| Kopvergrendelingstype | Push-Pull |
| Aanhaalmoment | 4 Nm (Pressure nut with coupling sleeve) |
| Nominale stroom IN | 2 A |
| Nominale spanning UN | 30 V AC |
| Mate van vervuiling | 3 |
| Maattekening | |
| Aantal posities | 8 |
| Nominale overspanningsspanning | 0.8 kV |
| Beschermingsgraad | IP65 |
| Aantal kabelaansluitingen | 1 |
| Overspanningscategorie | II |
| Signaaltype/categorie | Universal |
| Standaardaanduiding | M12 connector |
| Montage-instructies | Contacts can be clipped in place and unclipped without tools |
| Isolatieweerstand | ≥ 100 MΩ |
| Materiaal van de handgreep | Zinc die-cast, nickel-plated |
| Sleutelmaat, wartelmoer | 15 mm |
| Verbindingsdoorsnede | 0.14 mm² ... 0.34 mm² (flexible) |
| Normen/specificaties | IEC 61076-2-101 |
| Sleutelmaat, contramoer | 14 mm |
| Inbreng-/onttrekkingscycli | ≥ 100 |
| Aansluitdoorsnede AWG | 26 ... 22 (flexible) |
| Materiaal voor schroefverbinding | PA 6.6 |
| Omgevingstemperatuur (bedrijfstemperatuur) | -40 °C ... 85 °C (Plug / socket) |
| Brandbaarheidsclassificatie volgens UL 94 | V0 |
| Strippen van de individuele draad | 4 mm +0,5 mm |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding