| Parameter | Waarde |
|---|---|
| 230 V AC | |
| Opmerking | Class B |
| Kleur | green |
| Diepte | 43 mm |
| Invoer | asymmetrical 4 kV (Test Level 4) |
| Breedte | 72 mm |
| onbuigzaam | 0.2 mm² ... 2.5 mm² |
| Hoogte | 90 mm |
| Uitvoer | asymmetrical 2 kV (Test Level 3) |
| LED uit | Supply voltage input AC not present (Off) |
| Spanning | 10 V (Test Level 3) |
| Opmerkingen | Criterion A |
| Waardevermindering | < 100 V AC ... 85 V AC (1 %/V) |
| Functie | Visual operating state display |
| Positie | 1.x |
| flexibele | 0.2 mm² ... 2.5 mm² |
| Frequentie | 50 Hz |
| Stijgtijd | typ. 100 ms (UOut= 10 % ... 90 %) |
| EN 61010-1 | II (≤ 3000 m) |
| EN 62477-1 | III (≤ 2000 m) |
| Efficiëntie | > 92.5 % (120 V AC) |
| Criterium A | Normal operating behavior within the specified limits. |
| Criterium B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Criterium C | Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements. |
| Spanningsdip | 70 % |
| stijf (AWG) | 24 ... 14 (Cu) |
| Crestfactor | typ. 1.78 |
| Invoer/uitvoer | asymmetrical |
| Netwerktype | Star network |
| Producttype | Power supply |
| Montagetype | DIN rail or direct mounting |
| Onbelast bewijs | yes |
| Identificatie | UL 1310 Class 2 Power Units |
| Inschakelstroom | typ. 30 A (25 °C) |
| Geluidsemissie | EN 55016 |
| Geluidsimmuniteit | EN 61000-6-2:2005 |
| Productfamilie | STEP POWER |
| Inschakeltijd | typ. 2 s |
| Aanvullende tekst | Class 3 |
| Frequentiebereik | 0 kHz ... 2 kHz |
| Restrimpel | typ. 100 mVPP |
| Ontlading in de lucht | 8 kV (Test Level 3) |
| Horizontale helling | 4 Div. (DIN 43880) |
| Bouwmateriaal | Plastic |
| Maximale hoogte | ≤ 3000 m (> 2000 m, Derating: 10 %/1000 m) |
| Aantal fasen | 1.00 |
| Positiemarkering | 1.1, 1.2 (L), 1.3, 1.4 (N) |
| Beschermingsklasse | II (in closed control cabinet) |
| Signaaldrempel | > 0,9 x UN(UN= 24 V DC) (LED lights up green) |
| Striplengte | 10 mm (rigid/flexible) |
| Verbindingsmethode | Push-in connection |
| Contactontlading | 6 kV (Test Level 3) |
| Controleafwijking | < 0.5 % (Static load change 10 % ... 90 %) |
| Netzekering van het apparaat | 4 A internal (device protection), slow-blow |
| Montagepositie | horizontal DIN rail NS 35, EN 60715 |
| Aantal perioden | 25 periods |
| Uitgangsvermogen (PN) | 90 W |
| Schok (operatie) | 18 ms, 30g, per spatial direction (IEC 60068-2-27) |
| Beveiligingscircuit | Transient surge protection; Varistor |
| Soorten signalering | LED DC OK – signal state operation (UN= 24 V DC, IOut= IN) |
| Huidig verbruik | 1 A (100 V AC) |
| Mate van vervuiling | 2 |
| Maattekening | |
| Materiaal van de voetvergrendeling | Polyamid |
| Ingangsspanningsbereik | 100 V AC ... 240 V AC -15 % ... +10 % |
| Kortsluitingsbestendig | yes |
| Test veldsterkte | 10 V/m (Test Level 3) |
| Verbinding in serie | yes, for increased output voltage |
| Beschermingsgraad | IP20 |
| Frequentiebereik (fN) | 50 Hz ... 60 Hz ±10 % |
| Netspanningsbuffertijd | typ. 25 ms (120 V AC) |
| Standaardaanduiding | Electrical safety |
| Montage-instructies | alignable: 0 mm horizontally, 30 mm vertically |
| Interferentie-emissie | Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial) |
| LED brandt (groen), gelijkstroom OK | UOut>0.9 x UN(UN= 24 V DC) (on) |
| Laagspanningsrichtlijn | Conformance with Low Voltage Directive 2014/35/EC |
| Normen/voorschriften | EN 61000-3-2 |
| Trilling (werking) | < 15 Hz, amplitude ±2.5 mm (IEC 60068-2-6) |
| Parallelle verbinding | yes, for increasing power and redundancy with diode |
| Nominale uitgangsspanning | 24 V DC |
| Ontlaadstroom naar PE | < 0.25 mA |
| Met beschermende coating | PCB only |
| Geleide geluidsemissie | EN 55016 |
| Normen/specificaties | IEC 61010-1 (SELV) |
| Geïntegreerde zekeringbeveiliging | no |
| MTBF (IEC 61709, SN 29500) | > 2036000 h (25 °C) |
| Terugkoppelingsspanningsweerstand | ≤ 35 V DC |
| Nominale uitgangsstroom (IN) | 3.75 A |
| Vermogensverlies bij nominale belasting max. | < 5.7 W (230 V AC) |
| Elektromagnetische compatibiliteit | Conformance with EMC Directive 2014/30/EU |
| Inschakelstroomintegraal (I2t) | typ. 0.35 A2s |
| Typische netspanning | 120 V AC |
| Spanningstype van de voedingsspanning | AC |
| Omgevingstemperatuur (bedrijfstemperatuur) | -10 °C ... 70 °C (Derating > 50°C: 2 %/K) |
| Isolatiespanning ingang/uitgang | 4 kV AC (type test) |
| Installatieafstand rechts/links | 0 mm / 0 mm |
| Installatieafstand boven/onder | 30 mm / 30 mm |
| Maximaal vermogensverlies bij onbelaste toestand | < 0.21 W (230 V AC) |
| Minimaal vermogensverlies bij nullast | < 0.21 W (120 V AC) |
| Richtlijn milieubescherming | RoHS Directive 2011/65/EU |
| Brandbaarheidsclassificatie volgens UL 94 | V0 (Housing, terminal blocks, base latches) |
| Minimaal nominaal vermogensverlies | < 7 W (120 V AC) |
| Omgevingstemperatuur (opslag/transport) | -40 °C ... 85 °C |
| Aanbevolen stroomonderbreker voor ingangsbeveiliging | 6 A ... 16 A (Characteristics B, C, D, K) |
| Flexibel met huls en plastic hoes. | 0.2 mm² ... 1 mm² |
| Omgevingstemperatuur (getest opstarttype) | -40 °C |
| Flexibel met huls, zonder plastic huls. | 0.5 mm² ... 1.5 mm² |
| Maximale toelaatbare relatieve luchtvochtigheid (tijdens gebruik) | ≤ 95 % (non-condensing) |
| Beveiliging tegen overspanning aan de uitgang (OVP) | < 35 V DC |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding