Op voorraad Populair product
UDPHL113V
UDPHL113V DPH-L113V PANASONIC Sensor head DPH-L113V for compound pressure, -0.1 to 1.0MPa, R1/4 male thread,..
$0.00
USD
4170 op voorraad
Belangrijkste specificaties
Item:
Specifications
Kabel:
0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong
Opmerking:
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently.
Gewicht:
Net weight : 100 g approx., Gross weight : 150 g approx.
Leveranciersinformatie
PANASONIC
Producten: 4316
Wordt doorgaans binnen 2-3 werkdagen verzonden.
Kwaliteit gegarandeerd
Snelle verzending
Technische ondersteuning
Technische specificaties
| Parameter | Waarde |
|---|---|
| Item | Specifications |
| Kabel | 0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong |
| Opmerking | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently. |
| Gewicht | Net weight : 100 g approx., Gross weight : 150 g approx. |
| Details | Sensor head |
| Product | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] |
| Materiaal | Diaphragm : Stainless steel (SUS603), Pressure port : Stainless steel (SUS304), Throttle : Stainless steel (SUSXM7) |
| Bescherming | IP67 (IEC) |
| Accessoires | Connector (e-CON) : 1 pc. |
| Onderdeelnummer | DPH-L113V |
| Productnaam | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100 |
| Drukpoort | R1/4 male thread (throttle embeded) |
| Reactietijd | 1 ms or less |
| Productnummer | DPH-L113V |
| Voedingsspanning | 9 to 36 V DC[9 to 32 V DC when using the attached connector (e-CON)] |
| Kabelverlenging | Extension up to total 10 m32.808 ftis possible with 0.2 mm2, or more, cable. |
| Omgevingsvochtigheid | 35 to 85 % RH, Storage : 35 to 85 % RH |
| Toepasselijke vloeistof | Gases and fluids that do not corrode stainless steel SUS630, SUS304, or SUSXM7 |
| Aardingsmethode | Capacitor earth (Enclosure-supply terminal) |
| Schokbestendigheid | 1,000 m/s2acceleration in X, Y and Z directions three times each |
| Soort druk | Sealed gauge pressure(Note): The sensor's internal mechanism is sealed based on an air pressure of 1,013 hPa. |
| Verbindingsmethode | Connector |
| Omgevingstemperatuur | -20 to +70 ℃-4 to +158 ℉(No dew condensation or icing allowed),\n Storage: -30 to +70℃-22 to +158 ℉ |
| Huidig verbruik | 20 mA or less |
| Nominaal drukbereik | -0.1 to +1 MPa |
| Trillingsbestendigheid | 10 to 2,000 Hz frequency, acceleration 200 m/s2, in X direction for four hours, in Y and Z directions for two hours each(Note): The X, Y, and Z directions are defined as follows : |
| Analoge spanningsuitgang | Output voltage: 1 to 5 V DC (over rated pressure range)\n Accuracy: ±1.0 % F.S. (at 23 ±2 ℃+73.4 ±35 ℉)\n ±2.0 % F.S. (at -20 to 70 ℃-4 to +158 ℉)\n (including linearity, hysteresis and repeatability) |
| Isolatieweerstand | 100 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure |
| Toepasselijke regelgeving | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Gemiddeld temperatuurbereik | -20 to +70 ℃-4 to +158 ℉ |
| Spanningsbestendigheid | 150 V AC for one min. between all supply terminals connected together and enclosure |
| drukbestendigheid | 2 MPa |
Productbeschrijving
Sensor head, compound pressure. -0.1 to 1MPa. R1/4 male pressure port.
Belangrijkste kenmerken
- Industriële kwaliteit
- RoHS-conform
- CE-gecertificeerd
- 1 jaar garantie
Productdocumenten
Gegevensblad
Technische specificaties en prestatiegegevens
Gebruikershandleiding
Installatie- en bedieningshandleiding
