Op voorraad Populair product
UFX101P
UFX101P FX101P FX-101P PANASONIC Fiber amplifier, Standard type, PNP, display, connector type
$0.00
USD
4273 op voorraad
Belangrijkste specificaties
Item:
Specifications
Uitvoer:
PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 100 mA source current)
Gewicht:
Net weight: 15 g approx.Gross weight: 35 g approx.
Details:
Standard type
Leveranciersinformatie
PANASONIC
Producten: 4316
Wordt doorgaans binnen 2-3 werkdagen verzonden.
Kwaliteit gegarandeerd
Snelle verzending
Technische ondersteuning
Technische specificaties
| Parameter | Waarde |
|---|---|
| Item | Specifications |
| Uitvoer | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 100 mA source current) |
| Gewicht | Net weight: 15 g approx.Gross weight: 35 g approx. |
| Details | Standard type |
| Product | Digital Fiber Sensor |
| Materiaal | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| Accessoire | FC-FX-1(Protection cover): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| Onderdeelnummer | FX-101P |
| Kabellengte | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Productnaam | Digital Fiber Sensor FX-100 |
| Reactietijd | Emission frequency 0: 250 micro s or less (factory default setting)Emission frequency 1: 450 micro s or lessEmission frequency 2: 500 micro s or lessEmission frequency 3: 600 micro s or less |
| Externe invoer | PNP non-contact input- Signal conditionHigh: +4 V to +V DC (Sink current 0.5 to 3 mA)Low: 0 to +0.6 V DC or Open- Input impedance: 10 kOhm approx. |
| Productnummer | FX-101P |
| Voedingsspanning | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Timerfunctie | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| Digitaal display | 4 digits (green) + 4 digits (red) LCD display |
| Omgevingsvochtigheid | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Schokbestendigheid | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Verbindingsmethode | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| Stroomverbruik | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| Omgevingsverlichting | Incandescent light: 3,000 lx or less at the light-receiving face |
| Omgevingstemperatuur | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| Bedrijfsindicator | Orange LED (lights up when the output is ON) |
| Gevoeligheidsinstelling | 2-point teaching / Limit teaching / Full-auto teaching |
| Trillingsbestendigheid | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Isolatieweerstand | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Uitvoer: Uitvoerbewerking | Selectable either Light-ON or Dark-ON, at SET mode |
| Spanningsbestendigheid | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Zendelement (gemoduleerd) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| CE-markeringsrichtlijn | EMC Directive, RoHS Directive |
| Uitgang: Kortsluitbeveiliging | Incorporated |
| Functie voor het instellen van de emissiehoeveelheid | 3-level + Auto setting (from production in December 2007) |
| Interferentiepreventiefunctie | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2 or 3)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values.However, the interference prevention function does not operate at emission frequency 0 (factory default setting). |
| Fijnafstellingsfunctie voor de gevoeligheid | Incorporated |
Productbeschrijving
FX100 Amplifier F. Optical, PNP output, NOT including cable CN14AC2
Belangrijkste kenmerken
- Industriële kwaliteit
- RoHS-conform
- CE-gecertificeerd
- 1 jaar garantie
Productdocumenten
Gegevensblad
Technische specificaties en prestatiegegevens
Gebruikershandleiding
Installatie- en bedieningshandleiding
