Op voorraad Populair product
UFX505C2
UFX505C2 FX-505-C2 PANASONIC Fiber amplifier, NPN, analogue output, double display
$0.00
USD
4554 op voorraad
Belangrijkste specificaties
Item:
Specifications
Kabel:
0.2 mm26-core cabtyre cable, 2 m6.562 ftlong
Gewicht:
Net weight: 60 g approx.Gross weight: 100 g approx.
Details:
Cable type
Leveranciersinformatie
PANASONIC
Producten: 4316
Wordt doorgaans binnen 2-3 werkdagen verzonden.
Kwaliteit gegarandeerd
Snelle verzending
Technische ondersteuning
Technische specificaties
| Parameter | Waarde |
|---|---|
| Item | Specifications |
| Kabel | 0.2 mm26-core cabtyre cable, 2 m6.562 ftlong |
| Gewicht | Net weight: 60 g approx.Gross weight: 100 g approx. |
| Details | Cable type |
| Product | Digital Fiber Sensor |
| Materiaal | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| Accessoire | FX-MB1 (Amplifier protection seal): 1 set |
| Bescherming | IP40 (IEC) |
| Onderdeelnummer | FX-505-C2 |
| Productnaam | Digital Fiber Sensor FX-500 Ver.2 |
| Analoge uitgang | Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note) ]Response time: 2 ms or lessZero point: Within 4 mA plus or minus 1 % F.S.Span: Within 16 mA plus or minus 5 % F.S.Linearity: Within plus or minus 3 % F.S.Load resistance: 0 to 250 Ohm(Note) If display adjustment was conducted, it is not in this range. |
| Reactietijd | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| Externe invoer | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +1.2 V DC(at 0.5 mA source current)- Input impedance: 10 kOhm approx. |
| Productnummer | FX-505-C2 |
| Voedingsspanning | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| Timerfunctie | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffectiveIncorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective |
| Kabelverlenging | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more) |
| Diverse instellingen | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| Stroomverbruik | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output) |
| Uitgang 1, Uitgang 2 | NPN open-collector transistor- Maximum sink current: 50 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| Omgevingstemperatuur | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 12 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| Gevoeligheidsinstelling | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Timerfunctie: Timerperiode | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| Zendelement (gemoduleerd) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| CE-markeringsrichtlijn | EMC Directive, RoHS Directive |
| Functie voor het instellen van de emissiehoeveelheid | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| Interferentiepreventiefunctie | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| Uitgang 1, Uitgang 2: Uitgangspunten | 2 points |
| Mogelijke externe invoerfunctie | Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable |
| Uitgang 1, Uitgang 2: Uitvoerbewerking | Switchable either Light-ON or Dark-ON by L/D mode |
| Weergavebereik van de invallende lichtintensiteit | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| Externe ingang (schakelbaar met uitgang 2) | - |
| Uitgang 1, Uitgang 2: Kortsluitbeveiliging | Incorporated |
Productbeschrijving
FX-500 F Amplifier. Optical, analog output, 2 NPN outputs, dual display, high sensitivity and detection distance, ultra-fast
Belangrijkste kenmerken
- Industriële kwaliteit
- RoHS-conform
- CE-gecertificeerd
- 1 jaar garantie
Productdocumenten
Gegevensblad
Technische specificaties en prestatiegegevens
Gebruikershandleiding
Installatie- en bedieningshandleiding
