Op voorraad Populair product
UHLC2CE
UHLC2CE HL-C2CE PANASONIC Control unite HL-C2, low resolution, -5 to +5V, 4-20mA, NPN-type
$0.00
USD
3104 op voorraad
Belangrijkste specificaties
Item:
Specifications
Gewicht:
450 g approx.
Details:
Controller
Product:
Ultra High-speed High-precision Laser Displacement Sensor
Leveranciersinformatie
PANASONIC
Producten: 4316
Wordt doorgaans binnen 2-3 werkdagen verzonden.
Kwaliteit gegarandeerd
Snelle verzending
Technische ondersteuning
Technische specificaties
| Parameter | Waarde |
|---|---|
| Item | Specifications |
| Gewicht | 450 g approx. |
| Details | Controller |
| Product | Ultra High-speed High-precision Laser Displacement Sensor |
| Materiaal | Case: Polycarbonate |
| Accessoire | USB cable (2 m 6.562 ft long): 1 pc.Short bracket: 1 pc. |
| Onderdeelnummer | HL-C2CE |
| Invoer resetten | Reset is done when connected to Common (-).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Alarmuitgang | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less[between alarm output and Common(-)]- Residual voltage: 1 V or less(at 100 mA sink current) |
| Productnaam | Ultra High-speed・High-precision Laser Displacement Sensor HL-C2 |
| Timinginvoer | ON at/during connection to Common (-)(depending on analysis mode)Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Steekproeffrequentie | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms |
| Stroboscoopuitgang | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less[between strobe output to Common(-)]- Residual voltage: 1 V or less(at 100 mA sink current) |
| Productnummer | HL-C2CE |
| Voedingsspanning | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| Nulset-input | Zero set is ON when connected with Common (-).Zero set turns to OFF after continuously connected to Common (-) for one second.Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| Indicator: Vermogen | Green LED (lights up at power on) |
| Huidig verbruik | 500 mA approx. at 2 sensor heads connected350 mA approx. at 1 sensor head connected(100 mA approx. is additionally required when the mini console is connected) |
| Indicator: Alarm 1 | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) |
| Indicator: Alarm 2 | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) |
| Laserbesturingsinvoer | Laser emission is stopped when connected to Common (-).Laser is emitted immediately after opened.Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Invoer voor geheugenwijziging | Memory is specified when connected to Common (-).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Connectale sensorkop | Number of connectable units: Max. 2 units. |
| Externe vergrendelingsingang | Laser emission is delayed when connected to Common (-).Laser emission stop at openApplied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Analoge uitgang: Stroom | Current output scale: 4 to 20 mA/F.S (initial value)Output range during normal status: 2 to 24 mAOutput at abnormal status: 1 mA or 25 mAResolution: 3 micro A, Linearity plus or minus 0.05% F.S.Load impedance: 250 Ohm max., Response delay time: 10 micro s approx.(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. |
| Analoge uitgang: spanning | Voltage output scale: -5 to +5 V/F.S (initial value)Output range during normal status: -10.0 to +10.0 VOutput at abnormal status: -10.8 V or +10.8 VResolution: 2 mV, Linearity: plus or minus 0.05 % F.S.Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx.(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. |
| Beoordelingsresultaat (HI, GO, LO) | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less[between judgment output to Common(-)]- Residual voltage: 1 V or less(at 100 mA sink current) |
| Alarmuitgang: Uitgangswerking | Opened when the amount of light is insufficient |
| Stroboscoopuitgang: Uitgangswerking | Opened at data determination |
| Alarmuitgang: Kortsluitbeveiliging | Incorporated |
| Stroboscoopuitgang: Kortsluitbeveiliging | Incorporated |
| Indicator: Sensorkop A Laserstraling | Green LED (lights up during or immediately before laser emission of sensor head A) |
| Indicator: Sensorkop B Laserstraling | Green LED (lights up during or immediately before laser emission of sensor head B) |
| Omgevingsbestendigheid: Omgevingsvochtigheid | 35 to 85 %RH |
| Milieubestendigheid: Schokbestendigheid | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each |
| Omgevingsbestendigheid: Omgevingstemperatuur | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Beoordelingsuitvoer (HI, GO, LO): Uitvoerbewerking | Opened at output operation |
| Milieubestendigheid: Trillingsbestendigheid | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each |
| Beoordelingsuitvoer (HI, GO, LO): Kortsluitbeveiliging | Incorporated |
Productbeschrijving
High performance analog laser low resolution controller, HL-C2 series, RS232 port, analog output ±5V/ 4 - 20mA, NPN digital output
Belangrijkste kenmerken
- Industriële kwaliteit
- RoHS-conform
- CE-gecertificeerd
- 1 jaar garantie
Productdocumenten
Gegevensblad
Technische specificaties en prestatiegegevens
Gebruikershandleiding
Installatie- en bedieningshandleiding
