Op voorraad Populair product
ULS401PC2
ULS401PC2 LS401PC2 LS-401P-C2 PANASONIC Laser Amplifier (with display), cable 2m, 2 outputs PNP
$0.00
USD
3563 op voorraad
Belangrijkste specificaties
Item:
Specifications
Kabel:
0.15 mm25-core cabtyre cable, 2 m6.562 ftlong
Gewicht:
Net weight: 65 g approxGross weight: 75 g approx
Details:
Amplifier (Cable type)
Leveranciersinformatie
PANASONIC
Producten: 4316
Wordt doorgaans binnen 2-3 werkdagen verzonden.
Kwaliteit gegarandeerd
Snelle verzending
Technische ondersteuning
Technische specificaties
| Parameter | Waarde |
|---|---|
| Item | Specifications |
| Kabel | 0.15 mm25-core cabtyre cable, 2 m6.562 ftlong |
| Gewicht | Net weight: 65 g approxGross weight: 75 g approx |
| Details | Amplifier (Cable type) |
| Product | Digital Laser Sensor |
| Materiaal | Enclosure: Heat-resistant ABSTransparent cover: PolycarbonatePush button switch: AcrylicJog switch: ABS |
| Onderdeelnummer | LS-401P-C2 |
| Productnaam | Digital Laser Sensor LS-400 |
| Reactietijd | 80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch |
| MODE-indicator | RUN: Green LEDTEACH, L/D, TIMER, CUST, PRO: Yellow LED |
| Productnummer | LS-401P-C2 |
| Voedingsspanning | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Timerfunctie | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. |
| Kabelverlenging | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Digitaal display | 4 digit (green) + 4 digit (red) LED display |
| Omgevingsvochtigheid | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Selecteer indicator | Yellow LED(lights up when either output 1 or output 2 is selected) |
| Schokbestendigheid | 98 m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| Omgevingstemperatuur | -10 to +55 ℃+14 to +131 ℉(If 4 to 7 units are mounted close together: -10 to +50 ℃+14 to +122 ℉, if 8 to 16 units are mounted close together: -10 to +45 ℃+14 to +113 ℉)(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Huidig verbruik | Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage) |
| Bedrijfsindicator | Orange LED (lights up when output 1 and output 2 are ON) |
| Gevoeligheidsinstelling | Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustmentWindow comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentHysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentDifferential mode: 5-level settings |
| Timerfunctie: Tijd | 1 to 9,999 ms |
| Trillingsbestendigheid | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Isolatieweerstand | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Laseremissie-indicator | Green LED (lights up during laser emission) |
| Spanningsbestendigheid | 1,000 V AC for one min.between all supply terminals connected together and enclosure |
| Uitgangen (Uitgang 1, Uitgang 2) | PNP open-collector transistor- Maximum source current: 100 mA (Note)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less [at 100 mA (Note) source current](Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade. |
| Fijnafstellingsfunctie voor de gevoeligheid | Incorporated |
| Automatische storingspreventiefunctie | Incorporated[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)] |
| Uitgangen (Uitgang 1, Uitgang 2): Uitvoerbewerking | Selectable either Light-ON or Dark-ON, with jog switch |
| Uitgangen (Uitgang 1, Uitgang 2): Kortsluitbeveiliging | Incorporated |
| Externe invoer (Laseruitstraling stoppen Volautomatisch programmeren / Limiet programmeren) | PNP non-contact input- Signal conditionHigh: +4 V to +V DC (sink current 3 mA or less), Low: 0 to +0.6 V DC or open- Input impedance: 10 kOhm approx. |
Productbeschrijving
LS400 series digital laser amplifier, PNP, cable
Belangrijkste kenmerken
- Industriële kwaliteit
- RoHS-conform
- CE-gecertificeerd
- 1 jaar garantie
Productdocumenten
Gegevensblad
Technische specificaties en prestatiegegevens
Gebruikershandleiding
Installatie- en bedieningshandleiding
