Op voorraad Populair product
ZX-GTC41
ZX-GTC41 ZX 5002G 238015 OMRON PNP Amplifier 3 Digital Outputs 1 Analog
$0.00
USD
4148 op voorraad
Belangrijkste specificaties
Vasthouden (Specificaties):
Sample hold, peak hold, bottom hold, peak-to-peak hold, average hold, delay hold
Artikel (Specificaties):
ZX-GIF11/-GIF11A
Overige (Specificaties):
Measurement cycle setting, threshold setting, hysteresis setting, initialization, key lock
Materiaal (specificaties):
Case: PBT (polybutylene terephthalate), cover: Polycarbonate
Leveranciersinformatie
OMRON
Producten: 41472
Wordt doorgaans binnen 2-3 werkdagen verzonden.
Kwaliteit gegarandeerd
Snelle verzending
Technische ondersteuning
Technische specificaties
| Parameter | Waarde |
|---|---|
| Vasthouden (Specificaties) | Sample hold, peak hold, bottom hold, peak-to-peak hold, average hold, delay hold |
| Artikel (Specificaties) | ZX-GIF11/-GIF11A |
| Overige (Specificaties) | Measurement cycle setting, threshold setting, hysteresis setting, initialization, key lock |
| Materiaal (specificaties) | Case: PBT (polybutylene terephthalate), cover: Polycarbonate |
| Indicator (Specificaties) | Power ON (green), controller communications (orange), controller communications error (red), RS-232C communications (orange),RS-232C communications error (red), binary output (orange) |
| Lineariteit (specificaties) | ±0.1% F.S.2 |
| Uiterlijk (Specificaties) | Separate type |
| Resolutie (Specificaties) | 10 µm (number of process values to average: 16)3 |
| Accessoires (specificaties) | ZX-GIF_1A: Setup coftware (CD-ROM), 2 clamps, instruction sheetZX-GIF_1: 2 clamps, instruction sheet |
| Berekening (Specificaties) | 2 possible on up to two controllers (calculation Unit ZX-CAL2 is required for connecting controllers to each other.) A-B, A+B, width |
| Uitvoertype (specificaties) | NPN |
| Kabellengte (specificaties) | RS-232C 0.5 m, binary output 2 m |
| Lichtbron (Specificaties) | Visible semiconductor laser diode (wavelength 650 nm, CLASS 1 of EN60825-1/IEC60825-1, CLASS of FDA(21CFR 1040.10 and 1040.11) |
| Analoge uitgang8 (Specificaties) | For current output: 4 to 20 mA/F.S., max. load resistance 300ΩFor voltage output: ±4 V, (±5 V, 1 to 5 V9), output impedance 100Ω |
| Belangrijkste functies (specificaties) | Number of registeredsetups |
| Breedte meten (specificaties) | 28 mm |
| Timerfuncties (specificaties) | ON-delay, OFF-delay, one-shot |
| (Specificaties en bestelinformatie) | Order code |
| Omgevingsvochtigheid (specificaties) | Operating and storage: 35% to 85% (with no condensation) |
| Meetmodus (Specificaties) | Interrupted beam width measurement, incident beam width measurement, outer diameter measurement, center position measurement, IC lead pitch,IC lead width judgment, specified edge measurement, wire position measurement, glass edge position measurement |
| Detectieafstand (specificaties) | 0 to 500 mm |
| DC (Specificaties en bestelinformatie) | NPN |
| Meetcyclus6 (Specificaties) | 1.5 ms (standard mode (NORM))0.5 ms (high-speed mode (FAST))7 |
| Monsters om te middelen (Specificaties) | 1/2/4/8/16/32/64/128/256/512/1024/2048/4096 |
| 1 m (Specificaties en bestelinformatie) | 1 m |
| 2 m (Specificaties en bestelinformatie) | ZX-XGC2A |
| 5 m (Specificaties en bestelinformatie) | ZX-XGC5A |
| 8 m (Specificaties en bestelinformatie) | ZX-XGC8A |
| Omgevingstemperatuur (specificaties) | Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation) |
| Communicatiepoort (Specificaties) | RS-232C (9-pin D-sub connector) |
| Huidig verbruik (specificaties) | 150 mA max. (including receiver) |
| Diëlektrische sterkte (specificaties) | 1,000 VAC, 50/60 Hz for 1 min |
| NPN (Specificaties en bestelinformatie) | ZX-GIF11A |
| PNP (Specificaties en bestelinformatie) | ZX-GIF41 |
| 20 m (Specificaties en bestelinformatie) | ZX-XGC20A |
| Instelfuncties (Specificaties) | Optical axis adjust mode/light intensityt writing mode, variable binary level, variable edge filter, analog output scaling |
| Beschermingsgraad (Specificaties) | IEC60529 IP20 |
| Indicator (ontvanger) (Specificaties) | Optical axis setting indicator (green) |
| Indicatoren (zender) (Specificaties) | Laser ON indicator (green), laser alarm indicator (red) |
| Naam (Specificaties en bestelinformatie) | Order code |
| Voedingsspanning (specificaties) | Supplied from controller (power consumption: 60 mA max.) |
| Type (Specificaties en bestelinformatie) | Optical system |
| Nulresetfuncties (Specificaties) | Offset setting of zero reset value, zero reset value memory |
| Compatibele controller (specificaties) | ZX-GTC11 |
| Isolatieweerstand (specificaties) | 20 MΩ(at 500 VDC megger) |
| Gewicht (in verpakte staat) (Specificaties) | ZX-GIF_1A: Approx. 550 gZX-GIF_1: Approx. 330 g |
| Minimale detectieobjectgrootte (specificaties) | 0.5 mm dia.1 |
| Weergave tijdens meting (Specificaties) | Measured value, resolution, threshold, voltage output value, current output value (number of display digits can be changed) |
| Laser UIT-ingang/synchronisatie-ingang (Specificaties) | ON: Short-circuited with 0 V or 1.5 V max.OFF: Open (leakage current: 0.1 mA max.) |
| Temperatuurkarakteristiek (specificaties) | ±0.005% F.S./°C |
| Uitvoertype (specificaties en bestelinformatie) | Order code |
| Stroomverbruik (zender) (Specificaties) | 30 mA max. |
| Kabellengte (specificaties en bestelinformatie) | Quantity |
| Voeding (specificaties en bestelinformatie) | Output type |
| Apart type (Specificaties en bestelinformatie) | Through-beam |
| Voedingsspanning (zender) (Specificaties) | 24 VDC+10%, -15% ripple (p-p) 10% max. |
| Standaardkabel (specificaties en bestelinformatie) | Flexible cable |
| Geïntegreerd type (Specificaties en bestelinformatie) | 40 mm |
| Eenheid berekenen (specificaties en bestelinformatie) | ZX-CAL2 |
| Uitgang van het alarm voor laserdegradatie (specificaties) | NPN open-collector output30 VDC 20 mA max.Residual voltage 1.2 V max. |
| Slimme monitor GT (Specificaties en bestelinformatie) | ZX-GSW11 |
| Trillingsbestendigheid (duurzaamheid) (Specificaties) | 10 to 150 Hz single-amplitude: 0.75 mm for 80 min each in X, Y and Z directions |
| 12-bits binaire uitvoer (D11 tot D0, GATE) (Specificaties) | NPN open-collector output30 VDC 20 mA max.Residual voltage 1.2 V max. |
| Bedrijfsomgevingsverlichting (lichtbron) (Specificaties) | 3,000 lx (incandescent light) |
| Bedrijfsomgevingsverlichting (ontvanger) (Specificaties) | 1,000 lx (incandescent light)5 |
| HIGH/PASS/LOW Beoordelingsuitgang10Synchronisatie-uitgang11 (Specificaties) | NPN open-collector output30 VDC 50 mA max.Residual voltage 1.2 V max. |
| Timing-ingang, bankschakel-ingang, nulreset-ingang, reset-ingang (Specificaties) | ON: short-circuited with 0 V or 1.5 V max.OFF: Open (leakage current: 0.1 mA max.) |
Productbeschrijving
Controller, for ZX-GT, PNP output
Belangrijkste kenmerken
- Industriële kwaliteit
- RoHS-conform
- CE-gecertificeerd
- 1 jaar garantie
Technische details
Type
Productdocumenten
Gegevensblad
Technische specificaties en prestatiegegevens
Gebruikershandleiding
Installatie- en bedieningshandleiding
