| Parameter | Waarde |
|---|---|
| Freewheeling diode; Freewheeling diode | |
| Kleur | green (RAL 6021) |
| Diepte | 56 mm |
| Breedte | 6.2 mm |
| Hoogte | 80 mm |
| Isolatie | Safe isolation: Control side / contact side |
| Sollicitatie | Universal |
| Producttype | Relay Module |
| Schroefdraad | M3 |
| Montage-instructies | in rows with zero spacing |
| Montagetype | DIN rail mounting |
| Bedrijfsmodus | 100% operating factor |
| Productfamilie | DEK |
| Artikelrevisie | 11 |
| Contactmateriaal | AgSnO |
| Aandrijving (polariteit) | polarized |
| Vervuilingsgraad | 2 |
| Striplengte | 8 mm |
| Verbindingsmethode | Screw connection |
| Montagepositie | any |
| Aanhaalmoment | 0.5 Nm |
| Aandrijving en functie | monostable |
| Beveiligingscircuit | Reverse polarity protection; Polarity protection diode |
| Schakelcapaciteit | 2 A (at 24 V, DC13) |
| Ingangsspanningsbereik | 19.2 V AC/DC ... 26.4 V AC/DC (20 °C) |
| Opmerking over de aanvraag | Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. |
| Nominale overspanningsspanning | 6 kV |
| Overspanningscategorie | III |
| Gebruikelijke releasetijd | 5 ms |
| Normen/voorschriften | IEC 60947-5-1 |
| Typische reactietijd | 8 ms |
| Contactschakeltype | 1 changeover contact |
| Maximale inschakelstroom | 10 A (4 s) |
| Minimale schakelstroom | 10 mA |
| Type schakelcontact | Single contact |
| Mechanische levensduur | approx. 107cycles |
| Nominale ingangsspanning UN | 24 V DC |
| Nominale isolatiespanning | 250 V |
| Maximale schakelspanning | 250 V AC/DC |
| Minimale schakelspanning | 12 V AC/DC |
| Weergave van de bedrijfsspanning | Yellow LED |
| Geleiderdoorsnede AWG | 24 ... 14 |
| Beperking van de continue stroom | 6 A |
| Typische ingangsstroom bij UN | 9 mA |
| Datum van laatste gegevensbeheer | 02.05.2024 |
| Geleiderdoorsnede stijf | 0.2 mm² ... 2.5 mm² |
| Testspanning (wikkeling/contact) | 4 kV AC (50 Hz, 1 min., winding/contact) |
| Omgevingstemperatuur (bedrijfstemperatuur) | -20 °C ... 50 °C |
| Flexibele doorsnede van de geleider | 0.2 mm² ... 2.5 mm² |
| Uitschakelvermogen (ohmse belasting) max. | 140 W (at 24 V DC) |
| Omgevingstemperatuur (opslag/transport) | -20 °C ... 70 °C |
| Maximaal vermogensverlies onder nominale omstandigheden | 0.22 W |
Technische specificaties en prestatiegegevens
Installatie- en bedieningshandleiding